NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Netgear 781S AT&T Unite Pro - NAT
Love the 781S but the only thing is the NAT is set to strict on my Xbox. Spent hours searching the web and with Tech support from AT&T. Tried the DMZ, Port Forwarding, Upnp but nothing works. Finally, AT&T told me it is the actual device that sets the NAT and can't be changed. Is this true? Is there a way to get the NAT open? I noticed one of the features of this device was a NAT firewall. Is this causing the issue? If the device is unlocked is there a way to tweak settings to open up the NAT or some hidden menu?
At&t unite pro - Network Selection mode
When you go to Settings -> Mobile Broadband -> Preferences, there are 3 options: Int'l Roaming : Off On Network Mode: Auto(Default), LTE Only, 4G Only Network selection mode: Auto What is Network selection mode and how do I enable being able to change it? I'm assuming it lets me select the Bands I want the hotspot to use (such as LTE BAND 4 for aws)
MBR 1516 Port Fwd
I have a MBR1516 and trying to open a port 82 on ip 192.168.0.2 In advanced settings under port forwarding I have set up a custom service for TCP on starting on port 82 and ending on port 82 for ip 192.168.0.2 This port remains closed. Backgound: One camera in the USA that is working. One in Canada that is not. USA camera - non netgear router on port 82 through a cable modem and router. Port opened for HTTP on port 82 for 192.168.0.2 http://www.yougetsignal.com/tools/open-ports/ service reports port 82 open to external ip address. Remote camera access works fine. Canada camera not working: Camera connected to NetGear MBR1516 broadband router through static IP 192.168.0.2. Port fwd TCP service set up from start port 82 to end port 82 for 192.168.0.2. I can not get port 82 to open and can not connect remotely to camera. Internal IP 192.168.0.2:82 connects to camera and works fine. External address xx.xx.xx.xx:82 is closed. http://www.yougetsignal.com/tools/open-ports/ service reports port 82 closed to external ip address. Both cameras are using a noip service to obtain external IP addresses. This is the address I am using to connect to the camera and to test for open ports. Is there something unique about using a broadband LTE router with port forwarding? Some assistance on what to do to solve this would be greatly appreciated. Thank! Darryl
Aircard 320U Unsolicited Response -Enable
Hi, I have connected to /dev/ttyUSB2 (AT port) of AirCard 320U in Linux through minicom . But not getting Unsolicited responses like RSSI etc . Is there any specific AT command to enable Unsolicited responses like signal strength etc . ( Note: Huawei dongle is giving response properly ) :confused:
