NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
EX6200 stopped working- it does not show up on my Arris Router, cannot connect to internet
I have had this Extender or a year now, no problems. It stopped working a couple of days ago. I have My sonos hooked directly into the extender, the base router is an Arris from my ISP. I have reset the extender and router, I cannot access the extender on line via mywifinext.net- it will not work, I logged into my Arris Router and I don not see my Extender Listed. Any help would be appreciated....Fastlane: Iis it all its cracked up to be?
I have an EX6200. Been using it the conventional way for ages. Wondering if I should change to "fastlane"? Is it all tis cracked up to be? What are your impressions? I know one cannot specify a channel to use unless its in fastlane and that is a plus but does fastlane actually improve speed and capacity etc?EX6200: Extension Wifi hotspot Orange
Bonjour, Je cherche à étendre le réseau hotspot Orange. Connexion d'un smartphone sur Hotspot Orange (sans EX6200) Le reseau hotspot Orange est ouvert, la connexion se fait sans clef wep. Une fois connecté en wifi, il faut entrer un login/passwd sur une page internet Orange qui s affiche automatiquement. Une fois les login/password entrés, je peux naviguer sur internet avec mon smartphone. Connexion d'un smartphone sur Hotspot Orange via EX6200 Le EX6200 se connecte bien au hotspot d Orange. Mon smartphone se connecte bien au hotspot étendu crée par l' EX6200. En revanche quand je tape une URL sur mon smartphone, j ai un message d erreur disant qu il n'y a pas de connection internet. La page Orange qui permet d' afficher le login/password hotspot Orange ne s'affiche pas sur mon smartphone. Y a t il des paramètres particuliers à configurer dans l'EX6200 pour étendre un hotspot Orange ? Modele EX6200 AC1200 Wifi Range Extender Version firmware : version V1.0.3.76_1.1.111 Petite précision: mon EX6200 fontionne très bien pour étendre mon réseau wifi Orange perso sécurisé. MerciEX6200 - cannot get internet connection via wifi
Hi - we upgraded to the BTHub6, and now our EX6200 wont allow us to connect to it via wifi We can see the extender in the BT home hub admin console, but cannot change any details (e.g. static IP is used rather than DHCP) We can see the 2.4 and 5 GHz networks in the wifi list from a laptop, tablet or phone BUT when trying to connect (password is accepted) - but says 'no internet connection' I cannot connect via mywifiext.net .... or the IP address 198.168.1.250 I have tried ethernet from the BThub to the router. It says found, but no congifg page available so I can see any settings. Any help appreciated - thank youEX6200 Wireless Extender won't connect to Asus RT-AC68U
I am having trouble extending my Asus RT-AC68U router. My security is WPA2 Personal AES on the router. The Netgear sees the network easily enough but fails to connect either at 2G or 5G. The message is only that it "failed to connect". The range is close. I am at a loss as to what I might do. The setup said something about entering the 6200's mac addresses, but I don't see where I might add those or if it is even needed... I do get this message on the ASUS The WAN IP is not the external IP. External IP-based services will not work. But I'm not trying to create a WAN, so I'm not sure if that is relevant. Any help greatly appreciatedEX6200 Extender keeps kicking computers off with 'IP configuation' errors
My Equpment: Modem: Franklin Wireless R850 4g LTE Mifi Device with Sprint service (no ethernet or USB ports) Extender: Netgear EX6200 (firmware version V1.0.3.74_1.1.109) Connected Devices: 1 desktop, 1 home theater PC, 2 laptops, , 1 home server, 1 blu-ray drive, 1 printer, 1 receiver My Desired Setup: The only thing fed directly from the modem (via Wifi) should be the extender. The extender serves everything else in the house. Most items can connect via wifi with the exception of the desktop and the server. These are connected to the extender via ethernet (the home theater pc, blu-ray, printer, receiver, and one of the laptops is actually connected via ethernet as well to make faster in-house connections). The Issue: This is likely stemming from my complete ignorance when it comes to networking, but the wifi and the ethernet-connected devices are randomly getting kicked of the internet with "IP configuration" errors. I have reset the modem (quite a few times) and the extender (also quite a few times). Often this fixes the issue, but this happens at least five times each day - an annoyance I am not willing to deal with. I have done a factory reset, been on the phone with tech support, etc. I am currently just back to using the modem without the extender and have not had any issues. I tried everything for about three weeks with the factory defaults on the modem and the extender (except for username and passwords). The issue persisted. I then tried giving the extender a static IP address. I thought this fixed it, but the issue popped its ugly head up after six hours. I have turned off DHCP on the modem... no luck (it's now back on). I'm stumped... anyone? Thanks ahead of time, RoyPLEASE HELP ME! Can't connect to VPN via WiFi Range Extender
I am trying to connect to connect to my work VPN via my Netgear EX6200 WiFi Range Extender. It connects but doesn't allow me to connect to any of my drives. I was told by my IT department that I do have an IP address so they did verify that I was connected but that is as far as I can get. It is the same result reguardless if I am wired to it or on WiFi. The VPN does work perfectly if I connect either wired or through WiFi via my router (Netgear WNDR3400). There aren't a lot of settings to change on the EX6200 and I feel like I have changed every combination without any success. Both the ex6200 and the wndr3400 have the latest firmware. I unfortunately don't know anymore information about my VPN other than what I have provided. Thank you ahead of time for any help you can offer! :-)EX6200 Wifi visible but cannot connect
Firmware EX6200-V1.0.3.74_1.1.109 has been installed and the WiFi network is visible however I cannot connect to the extender using WiFi. I can connect the extender to my PC and manage the network but not using WiFI. The signal strength is good. Any suggestions would be appreciated. cEX6200 wifi extender is frozen. won't reset - frozen with the numbers 1-5 lit up.
In tears here with this thing. I've hardly used this machine: it's been sat safely on a shelf for a year. I managed to get it working a few weeks ago after hours of faffing, only to turn it off at the wall (I don't want things left on in my room at night, so I can't see how this should be a problem) and for it to not work anymore. I made no changes to my BT network on the BT hub5 during that time--didn't even turn it off. It never worked as it says in the book/ the 5ghz light only lit now and then, even when I was connecting to it. This happened on two machines as I returned the first, so i assumed it was my fault and never got round to conatcing support or getting my money back in warranty as I was away. Now it won't reset using the pinhole button. I've turned it on and off, unplugged it for 10 minutes, plugged it into the Mac and the wifi router following vcarious directions on here. Its frozn with the numbers 1-5 lit up. Nothing else happens. These are on even without an ethernet cable in a port. I'm at my wits end here. i spemt £100 on this thing and its never worked properly. I cant reset it using the online method as the router wont even light up or connect. help! :-(
R7000>EX6200 Antenna Replacement
So i have a R7000(2dBi) & EX6200(5dBi). [Distance: 160'+ / through woods and brick walls | running a cat cable is not financially suitable] I have my extender configured with fastlane technology: router>2.4gHz | end-device>5gHz sidenote: How can I configure what channel from the extender side (2.4) to router (2.4) i am broadcasting on, so that it can match with the channel on the router side? Or does the extender side recognize the channel the router is already broadcasting on and select that as the appropriate channel? I want to replace one antenna on each end with a 13dbi yagi wireless high gain booster directional antenna rp-sma inside to keep safe from the elements and direct towards the opposite to get a better connection. Would this create a better connection in order to acheive a greater download speed? Is it possible to run two dual-band and one 2.4gHz yagi antenna(s) on the Netgear Nighthawk R7000 | one yagi/omni on the Netgear Wi-fi Extender EX6200?
