NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Reset
2 Topics
Cannot access GS110TPP after reset
I purchased a used GS110TPP which I need for its PoE features and performed a factory reset by pressing the reset button on the front panel for more than 5 seconds. I expected to be able to access the switch on http://192.168.0.239 or at least to be able to ping it. However, I was not even assigned a DHCP address, so my computer got a 169.254.x.x self assigned address. I then set my own address manually to 192.168.0.240 (netmask 255.255.255.0, according to the manual), but still cannot access the switch. Is there anything else I can do? I performed multiple resets with different times of pressing the button (below 2 seconds, below 5, over 5, over 10, over 20). Kind regards JohannesSolved
FS750T2 does not boot, all lights are green
I have 2 used of these switches, both with the same problem: When I put in the powercord all lights of the 48 ports are on (green). Nothing happens when I connect the switch to my modem. Is seems that nothing happens when I use the restart button and/or reset to factory settings button. Suddenly (I don't know exactly after what I was doing) I saw a switch in the SmartWizard and only 1 port was green. It looks like the switch was working fine and I installed the latest firmware. All went fine, but after I take off the powercord and put it back again the same problem appaers. Now I can do what I want, nothing seems to help to reboot the switch. Is there a certain reset procedure to use the reset and/or reset to factory button(s)? Do anyone have an idea why the switch is not booting complete? Ane other ideas are welcome, thank you in advance!Solved