NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Trying to change the name of my router on the extender
This is frustrating. I have a new router (R7000). It has a new name and password. There are 2 speeds on the router, The 5G speed still has the name of the old router, however it connects with the password of the new router. I wanted to correct this by logging into the extender. I don't know the password to the extender access. So... I'm on the "Extender Password Recovery." I got to this by putting in the serial number of the EX6100. Now it wants me to answer two security questions. I answer the questions -- they are not answers that I don't know --- my sister's first name, my father's middle name... Then I get "The information you entered does not matcch what is saved on the routher." AFAIK I've never given this information to my (R7000) router!! I might have given it to the extender... when it was connected to the old router... Is there anyway to completely reset this extender?CG3000D will reset but network remains password protected
I bought this router used and pushed the factory reset button when I plugged it in. It shows factory SSID but it’s password protected! I can not login to my network to make changes. I then held the factory reset button for 30 seconds and then disconnected power and plugged back in and my SSID is now 000000 still password protected. Help!ReadyNAS "Admin Page" is offline
Upgraded to firmware 6.7.5 through the web interface and now the unit is not responing via the browser at all. SMB share is still working Tried Rebooting Tried Reset via reset pin on back and selecting OS Reinstall - same issue Raidar Diagnostic will not connect, but raidar says unit is healthy ! I cannot download the logs because login is not working, I know the password before someone suggests password recovery. Looking at USB recovery but cannot get the tool to recognise any firmware to make a usb for me. Format USB to Fat32 and put these in root Reboot machine and hold backup for 30 seconds. Machine says booting from usb, then after a few minutes, resets and does FW Upgrade. But the firmware is still 6.7.5 ?? How to do it? What am I doing wrong? I know the issue is network adapter related because "\\192.168.1.101\folder" is working fine, but "\\192.168.1.147\folder" comes up with network error do i want to diagnose? If I factory reset it with different disks in it, can I the set it to x-raid and put back the original disks without losing data? Will factory reset put the original firmware back in or will it use 6.7.5 ? I really want to get this working again :( Many thanks for any helpOrbi WiFi System performed a hard reset to factory defaults overnight
I got my orbit set up on Sunday. Everything was working well until Tuesday morning. When I woke up Tuesday morning my SSID had changed back to ORB20. Tried to logon with my password, didn't work. All my settings were gone, a factory reset had taken place overnight. Check with the family and no one played with the system. Any idea how a factory reset and happen 'spontanously'? RBR50 Firmware V1.10.1.2 Operation Mode RouterHave to Reset my CM500 when I Reboot the Computer
When I have to Reboot my Lenovo ideapad 70017ISK Laptop the Internet quits working. The Ethernet connection shows service and when I run the Windows 10 Troubleshooting it doesn't show any problems but I still can't connect to any Websites with the Browser. What I have to do is Reset the CM500 and then I can connect to the Web again. Any help would be greatly appreciated!
