NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Security Concerns. C7000v2
Hi All, the past 8 months i have been monitoring something strange on my network. As a tech illiterate, it has been an evolution in trying to understand what is happening. Hopefully there is either some answers or reassurance out there. -NightHawk C7000v2 Combo -Firmware is V1.03.08 -ISP is Xfinity Cable Question: -On my admin page, i have DLNA turned off, confirmed many times, on the nighthawk app there is no DLNA server present. On the below Fing network tool screen shot below you will see it is present. it always is, except for about 1-2 hours after i factory reset the Gateway. then it returns. how do i remove completely and why would it not show on the App interface? -On the screen shot there are 6 active devices on that network, two are accounted for as my iphones, the others including the DLNA server 10 (11,30(not pictured)) should not be on this Channel. In an attempt to be more secure, I have restricted "new 2.4" to only my two phones, there is nothing I have ever typed that password into other than those 2 phones. All other devices in my house, both family and friends use the 2.4/5 guest network channels and those are the only SSIDs broadcast. there should be no trace of New 2.4 to anyone but me. I am wondering how other devices show up on this channel. Please note all info is based on this third-party app i am using. It has been pretty accurate in the past for devices coming and going on my guest network. -Check out the screen shot where it shows my gateway, which is absolutely a NetGear nighthawk. the gateway says c7000v2, but adjacent to it, it says Motorola surfboard sbg6580. I found screen shots of the same app, from last fall, the same place it says Netgear CSIS 3.0 Cable Modem Router. I cannot reconcile that in 6 months' time, the same app has confused the hardware. this has led me to concerns for what is triggering the error in labeling. -Lastly, what has caused me to come looking for more information, the aforementioned segmented networks, consists of a 2.4 and 5Ghz Channel, for the last 3 weeks, although i can access and log on the 5ghz channel, there is never any actual connection available. I can join, password connects, but my phone defaults to carrier service and the WiFi dashboard on my iPhone says "no internet connections" this is all day everyday. I have reset the device multiple times in those 3 weeks and changed the password. nothing has fixed it or changed it, it still shows as i can connect, but no Wifi data. Any insight to any of the above would be greatly appreciated. thank you all for your time!Nighthawk CAX30 required login for internet
I have a brand new CAX30, and when I hooked it up and got it activated by my ISP, I was unable to access the internet without logging in. This is after I put in the pass for the wifi connection. When I bring up a browser, it tells me I need to log in (like connecting to some of the department store guest wifi's), but doesn't give any user/pass or button to click OK. How can I turn that off? Thanks, JchoppCAX80 Disconnecting me from Call of Duty MW2 servers
Hi everyone, Currently have a CAX80 and I am unable to play MW2 Online before it disconnects me for server issues. It's not Activisions servers nor is it my PC as it works with my old router/modem. I even tried portforwarding and switching to a static IP(which caused my wifi to go down.) Don't know what to do or try at this time. Can anyone help with this?I accidentally myself by blocking new users in access control
Help, bought a brand new NETGEAR modem router AC1200. Had a hard time installing it but after I installed it, I went to access control and block any users who try to access. However I accidentally blocked me too. Now I can’t access without seeing a black screen with two red line, one on top and bottom. How do I start this router from scratch again and resetting it a couple times didn’t help? How do I get it working again?NO RANGING RESPONSE, DoS attack, C7000v2 on spectrum
Ok so I have few problems. 1. I keep getting this message from my event logs. | No Ranging Response received - T3 time-out;CM- MAC=94:a6:7e:20:14:14;CMTS-MAC=00:17:10:88:25:62;CM-QOS=1.0;CM-VER=3.0; SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;;CM-MAC=94:a6:7e:20:14:14;CMTS-MAC=00:00:00:00:00:00;CM-QOS=1.0;CM-VER=3.0;| Over and over I have rebooted several times, and have factory reset several times same thing. 2. I’ve been getting this message from my regular logs. | [DoS attack: TCP- or UDP-based Port Scan] from 209.18.47.62, port 53 And LAN access from remote] from 193.163.125.192:41455 to 192.168.0.12:3479 LAN access from remote] from 167.94.138.103:62577 to 192.168.0.12:1723 |c6900 wifi router
After factory resetting my router I was finally taken to the page to set it up. I logged into the netgear geni via the browser it took me to without incident. However it allowed me to access 3 different areas then suddenly it started saying cannot access due to insecure security settings with a Mozzila logo. I decided to try using microsoft edge but it did the same thing. So hey thanks to everyone for helping me log into it unfortunately I must report it was to no avail. Any suggestions on what to do now? Oh and the desktop geni app doesn't work with my router. Thanks in advance Also now I can't even reach the login page http://www.routerlogin.com/genie_index.htm again, it goes back to netgear.com absolutely unacceptable- NETGEAR do BETTER!!
