NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Netgear WiFi 7 WBE710 802.11k/v Disabled After FW upgrade.
I upgraded to V11.8.0.14 and I'm not seeing on my devices that 802.11k/v are now disabled. I know 802.11r is only supported with InSights but now they are disabling features? I rolled back to V11.5.1.5 and then they show enabled. Why is Netgear disabling features for APs? Is anyone else seeing the same? You can't even open a support case with Netgear without paying nowadays. This are extremely useful protocols for device roaming and now they are disabled in the backend? I would like an explanation. Factory reset performed made no difference. Quick Configuration Settings - Everything else is default. Static LAN IP Configured 192.168.x.x SystemName Set LED Disabled - High doubt it is this. I've seen weirder Single SSID Configured WPA3/WPA2 Personal VLAN ID configured Band Steering Enabled Wireless Settings - 2.4/5/6Ghz All 3 bands are configured with Dynamic Channel Width
Nighthawk LTE Mobile Hotspot Router – Gigabit WiFi on the Go – AT&T Networks
The wait is over! Experience fast premium WiFi on the go, with the Nighthawk Mobile Hotspot Router on AT&T. You can take it with you! The Nighthawk LTE Mobile Hotspot Router is your ultimate mobile router. Now you can do anything you can do at home virtually anywhere you go. It’s battery powered router with Dual-Band Wifi 2.4/5GHz allowing up to 20 devices to connect to it. Nighthawk® LTE Mobile Hotspot Router Model: MR1100 TECHNICAL SPECIFICATIONS • Max 1 Gbps download speeds & 150 Mbps upload speeds • LTE CAT 16, 4-band CA and 4x4 MIMO • Up to 4X Carrier Aggregation and LLA • LTE/4G 1/2/3/4/5/7/12/29/30/66 • 3G 2/4/5 PHYSICAL SPECIFICATIONS • Dimensions: 105.5 (L) x 105.5 (W) x 20.35 (H) mm • Weight: 240 g (with battery) • Battery: 5040mAh for up to 24 hours of use* *24 hour battery life is achieved by the following worst case: stream YouTube for 1 hour followed by 30 minutes idle time and then repeat for over 24 hours Do you have any questions for us about the Nighthawk LTE? Our experts would love to help if you leave a comment below.
SXR80 under warranty, but end of life
Hello, We have an SXR80 router and 2 SXS80 satellites. All are under warranty, but Netgear has EOL'd these devices. That means that there are no more firmware updates, etc. What are our options for replacing these? I mean, they weren't cheap and now they're not even supported by the manufacturer. Warranty doesn't mean much in this instance, does it?Selective VPN for specific devices?
Hi all. Asus router have a feature called VPN Fusion. It allows set up of multiple VPN networks and the ability to select specific devices on the network that use the VPN. Does Netgear have a similar feature on their routers? And if so, which specific models (preferably from the mesh network range) actually have this feature? I need to set up my VPN service on the router and only have 3 devices on my network use it.EAX20 intermittent?
I have a Nighthawk R7800 on the lower level of my home. A few years ago I added a Meross WiFi device for my garage door. Because of an apparent weak signal, I later added an EAX20. All was well until the past week when my video doorbell started going offline (it’s about 15’ from the EAX20). After much messing around, the doorbell somehow got connected to the router instead and all is well again. The EAX20 clients are mostly IP cameras and have never gone offline. Is the a means to select which AP a device connects to?
