NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
The current IGMP Querier does not match the planned IGMP Querier.
Hello, I have a network of 43 switches (M4250, M4350), without a Core, in a non conventional wiring configuration (not a star, not a daisy chain, just a mix) where I chosen the switch in the middle of it as Querier. After a few months, another one is acting as Quierer. I setted up the whole network with Engage and the devices are up to date. In Engage>Site Settings>IGMP Quierer I have a yellow mark on the selected switch (that is not acting as Quierer) the following message: The current IGMP Querier does not match the planned IGMP Querier. Is this already happen to anyone here? Thank you so muchNetgear M4350-24G4XF - Multicast
Hi Community, We recently purchased the aforementioned switch to replace a failing Xtreme. We have our VLANS setup and for the most part things seem to be working. Prior to this new switch we had another configured as the multicast querier, but the goal was for this switch to take over the role. We've been experiencing network & internet performance issues; it looks like the switch is flooding the core. I'm attempting to disable Multicast router on the uplink port, but it won't disable, and I can't figure out what setting is enabled that is preventing me front disabling this option. Or maybe we have a multicast configuration problem. Any feedback would be greatly appreciated.Limit big amount of "multicast packets received" on single port
3 x STACKED GS748TS BOOT VERSION 1.0.2.0 SOFTWARE VERSION V 5.2.0.11 Server Ubuntu 12.04, Service CUPS 1.5.3 AP Ruckus 7372 - firmware 9.8.3.0.14 The AP stop propagate the printers over the IPP protocol, turn off and on the radio on ruckus and the IPP protocol return alive, this happens every 3 weeks! After some troubleshooting, the ruckus support pointed me to check the Multicast package and infact there are very high, I tried to set enable Storm Controll on the port with Broadcast Mode > BroadCast, Multicast and Broadcast Rate Threshold to "3500", I still have the same issue, any suggest ? thank you