NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Netgear M4100-D12G - IPV4 Net Interface
I've just bought a Netgear M4100-D12G switch. I've connected to it via console USB cable and given it a management IP address. Everything is fine. I have a query though as I don't understand something which someone who is more familar with the set ups will. The IPV4 Network Interface - the logical interface. It has fields for IP, S/M and D/G amongst others. The IP field doesn't display the same IP as what the management IP is set to. It displays the default IP of 169.254.100.100 and the S/M is set to 255.255.0.0. It throws up an error when trying to set it up as the same as the management IP but will accept the changes to the D/G though. I am clearly misunderstanding what it is used for. Could someone explain or give an example of where it comes in to play please. Thanks in advance.Which browser?
Which browser to use in programing a GS724TPS? Specifically when trying to setup vlan's. Firefox and chrome work, but when I select VLAN Membership, it doesn't give me the table to tag ports. I did get it to work sometimes with IE, but right now IE hangs if I select the "Switching" tab, the switch itself is not hung as I can hit refresh and it goes back to the main page. I had one switch standalone before and it worked ok, but I currently have a GS748TS and a GS748TPS in the stack that I'm having issues with. I also have a GS724Tv3 that does not exhibit the same issue. All switches on the latest firmware 5.2.0.10 Thanks, Steven
Help with discriminating wifi AP traffic please
Hi, I am seeking some general direction in the best way to discriminate and segregate wireless AP traffic using a managed switch. I can set up several secure SSIDs on the AP and the AP can be set to tag traffic from each SSID with different Vlan IDs. My question is how do I keep traffic from one SSID private and allow it to access both private network and also the WAN whereas the other SSID clients are only to be able to connect to WAN and not be able to see the private traffic. In other words how may I split the tagged packets from the AP at the switch? Grateful for some guidance here on best approach please. Budgie2 I am using an M4100-DG12 managed switch.Cannot discover GS108T
Hi My GS108Tv2 switch was working ok. Then I performed a factory reset (because of various problems). I set my local PC address to 192.168.0.1 and I have only that PC connected to the switch. I have power cycled the switch. The switch responds to a ping at 192.168.0.239 but SmartControlCenter will not 'Discover' the switch. No switches are found. I am running SmartControlCenter 1.1.3.2. How can I fix this please? BR David