NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
SRR60 - random Wi-Fi drops
I have an SRR60 with four active SSID's and about 75 devices connected. (A lot of home automation) A couple times a day, the Wi-Fi seems to shut off. Multiple devices and PC's in the house report no Wi-Fi connection. This occurs on all the SSID's 5 and 2.5 at the same time. About a minute or two later everything restores. I'm on the latest/last firmware. 2.7.3.100. The uptime on the debug page is accurate. The unit is not rebooting. No errors or bad signals on the cable modem. (bridged and no Wi-Fi) Any thoughts or suggestions are appreciated.NETGEAR DG834Gv5: disconnessione dispositivi
Salve io da qualche tempo ho problemi con questo modem, spesso i dispositivi connessi si li perde finchè non riavvio, poi ultimamente ho avuto problemi con uno smartphone wiko che si perdeva insistentemente la connessione finchè non ho cambio la chiave del modem in WPA-PSK+WPA2-PSK (precedentemente non sò perchè era impostata su WPA2-PSK (Wi-Fi Protected Access 2 Pre-Shared Key)) adesso va bene il wiko ma la stampante risulta sempre offline finchè non riavvio il modem...Da cosa può dipendere è guasto? GrazieR8000 Firmware
Per NetGear social media, we are supposed to suggest the below idea here. My idea, as crazy as it sounds, is that Netgear continue to support their R8000 devices. I know, sounds insane but hear me out. People spent hundreds of dollars on a product featuring the "latest tri-band wifi" technology. Now instead of leaving them hanging with a big security exploit for two months, device issues and a feature release stall, Netgear should develop a new robust firmware. Ideally it would be one that wouldn't encourage them to go out and try questionable 3rd party firmwares. That means, it should be competitive (feature wise) with those 3rd parties while fixing ongoing issues highlighted in the forums. Benefits: 1. Happy customers who don't feel like they wasted money and are not stranded with a reletively up to date tech, that lacks manufacture support, features and security. 2. See #1 above. I think it deserves reiteration. Facts 1. product saw less than 18 months of firmware releases and developer support. 2. Nearly 9 months have past since the last firmware update (as of 8/31/2016). 3. June 2016: security notice suggested disabling of features due to security exploit. 4. 2 month later, June 2016 security exploit is still unpatched, leaving customers exposed. 5. There are no Nighthawk products listed on the NetGear EoL page, including the R8000. 6. The product is still available through online and big-box retailers.
WAC104 Unable to Control WiFI Channel BandWidth
I setup 4 WAC104 as Acces Points, and there are no settings available to limit channel Bandwidth in 2.4 and 5GHz spectrums. There is a compatibility setting which appears to give no control over BandWidth. The shopping Center is very congested and I would like to force SSID "VillageLife" to 20MHz (See attached Images). This should be a setting to make it more friendly in congested areas. Apple devices do not use 40MHz, only 20MHz. Am I missing something? I contacted Tech Support and they claim there is no setting to limit Bandwidth, and told me to post it here. Most WiFi AP units I have dealt with allow you to limit bandwidth, so I'm surprised to see there is no bandwidth setting, and therefore hard to recommend to other clients (we like the 4 LAN ports SWITCH, allowing us to hardwire local computers to Ethernet and not WiFi).make it possible to go up one level in cli configuration of WNDAP620
it would be cool to be able to go up one level during cli configuration of said AP. Like in Ciscos IOS, if you are in "configure terminal" or in an "interface" you should be able to go up one config level to be able to choose a different configuration item. At the moment you're "stuck" in the lower level and need to reconnect (and relogin) to configure the AP furtherD6220 e stampante wifi
Da quando ho acquistato il Modem router WIFI AC1200 modello D6220 (che tra l'altro trovo OTTIMO) non riesco più a configurare in rete la stampante HP Laserjet P1102w: riesco a stampare SOLO se la collego ad una porta usb del PC o alla porta usb del modem, ma in WIFI non viene riconosciuta anche se il collegamento WPS risulta corretto. Ho provato tutte le soluzioni fornitemi sul sito HP, ma con nessun risultato. Con il modem precedente non avevo nessun problema: tra l'altro ho necessità che venga "vista" sia da un PC (Windows 10) che da un IMAC (OS High Sierra), entrambi collegati al modem via LAN. Grazie per i consigli... RiccardoProblème avec ma clé wifi
Bonjour, j'ai actuellement un problème avec ma clé wifi netgear. C'est une netgear wnda3100v3. Dans la boite, je trouve belle et bien le cd pour les drivers. Problème, je n'ai pas de lecteur dvd. Donc, ayant un deuxième ordinateur, je prends les drivers de la clé wifi. Je les transfère par clé usb. Tout se passe bien, j'ai internet CEPENDANT, oui car il y a bien un cependant. Par exemple, quand je joue à counter:strike un jeu fps. La connexion crash de temps à autre. Je remets la connexion SAUF que des fois elle recrash. J'ai re installé les drivers par la clé usb, toujours le même problème. J'ai redémarrer plein de fois ma livebox et mon ordinateur Ps: Je suis sur windows 10 et je suis chez orange. Avez-vous une solution pour éviter les crash ? Merci bien.
Ping spikes and packet loss on WiFi
Hi, I’m having trouble with my orbi router with online gaming over WiFi. For the rest it works extremely well with high speed (400 down 40 up) and very low pings (10ms), all on WiFi. However with online gaming I got ping spikes and packet loss which makes it impossible to game online over WiFi. Over Ethernet it works great so it’s not my ISP that is the issue. How can I solve the spikes? There is not QoS option available in the routers interface. I have tried switching the satellite off but the problem remains. Hope somebody can help! Thanks Christiaan
