NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Orbi 2.2.1.210 fimware security issue (turns on guest network with no password)
Has anyone else experienced this? I upgraded by Orbi to 2.2.1.210 - everything seemed fine. I have a guest network (with a password) that I leave disabled and only enable when we have a guest. It is ...
Try FW re-load and full factory reset and setup from scratch:
Does it still occur after this?
I have already fixed it as I described - namely, by turning the guest network on and back off again.
I was however, highlighting the issue that this may happen when the firmeware is updated and it shouldn't happen. It was pure chance that I noticed this and my network had been completely open for several days as a result.
Would need to try a factory reset and setup from scratch to see if this is something that changed in the new FW. Something NG will need to know.
ploo wrote:
I have already fixed it as I described - namely, by turning the guest network on and back off again.
I was however, highlighting the issue that this may happen when the firmeware is updated and it shouldn't happen. It was pure chance that I noticed this and my network had been completely open for several days as a result.
Stop asking customers to do factory reset and other time wasting procedures that is not part of the instruction from Netgear themselves and hoping that it fixes something. Netgear should be the one doing the testing with new firmware releases to ensure integrity of previous configurations during upgrade. I think you might think that is helpful, but plenty of customers have wasted some many hours of their time doing unnecessary resets.
FURRYe38 wrote:
Would need to try a factory reset and setup from scratch to see if this is something that changed in the new FW. Something NG will need to know.
Sorry, this is a valid proceedure to do as others have said it's worked for them:
https://community.netgear.com/t5/Orbi/Firmware-2-2-1-210-released-as-of-10-3-18/m-p/1647303/highlight/true#M42416
https://community.netgear.com/t5/Orbi/RBK40-Download-Speed-Slows-Down-After-5-Days/m-p/1643475/highlight/true#M41776
https://community.netgear.com/t5/Orbi/Orbi-MR-2-1-Update-3-23-18/m-p/1548414/highlight/true#M27868
https://community.netgear.com/t5/Orbi/speed-slows-down-Orbi/m-p/1551822/highlight/true#M28289
https://community.netgear.com/t5/Orbi/Is-2-1-3-4-in-auto-update/m-p/1553979/highlight/true#M28616
https://community.netgear.com/t5/Orbi/Orbi-Satellite-RBS50-Not-Connecting-via-Ethernet/m-p/1556692/highlight/false#M28949I'll keep posted as I see fix. Thank you.
toe wrote:
Stop asking customers to do factory reset and other time wasting procedures that is not part of the instruction from Netgear themselves and hoping that it fixes something. Netgear should be the one doing the testing with new firmware releases to ensure integrity of previous configurations during upgrade. I think you might think that is helpful, but plenty of customers have wasted some many hours of their time doing unnecessary resets.
FURRYe38 wrote:
Would need to try a factory reset and setup from scratch to see if this is something that changed in the new FW. Something NG will need to know.