Configure SSL/HTTPS for GS724TPV2 and GS752TPv3

Question

Hi All, I am looking to enable HTTPS for all my Netgear Switches (GS724TPV2 and GS752TPV3). But I cannot import the self-signed certificate that I have already got available. I feel like I'm missing a vital step, and was wondering if someone is able to help me on this? Looking forward to hearing some advice. Cheers!

RylieColette · Answer

Have you verified that the certificate matches the required key length and signature algorithm supported by the Netgear switches?

RylieColette · Answer

&nbsp;Have you verified that the certificate matches the required key length and signature algorithm supported by the Netgear switches?&nbsp;

SS-SysAdm · Answer

Hi&nbsp;RylieColette, we use a length of 2048, which I believe is good for Netgear devices.

BrianL · Answer

Hi SS-SysAdm,
&nbsp;
Welcome to the community!
&nbsp;
To import self-signed certificates for your NETGEAR switches GS724TPV2 and GS752TPV3, follow these steps:
&nbsp;
For GS752TPV3:
Log in to the switch: Open a web browser and enter the IP address of your GS752TPV3 switch.
Navigate to the certificate settings: Go to LAN Setup &gt; Certificates1.
Import the certificate: Select the Import option and upload your self-signed certificate file1.
Enter the public and private keys: If required, paste the public and private key information from your certificate file1.
Save the changes: Make sure to save and apply the changes.
&nbsp;
For GS724TPV2:
Log in to the switch: Open a web browser and enter the IP address of your GS724TPV2 switch.
Navigate to the certificate settings: Go to LAN Setup &gt; Certificates.
Import the certificate: Select the Import option and upload your self-signed certificate file.
Enter the public and private keys: If required, paste the public and private key information from your certificate file.
Save the changes: Make sure to save and apply the changes.
&nbsp;
Feel free to ask if you encounter any issues or need further assistance!
&nbsp;
&nbsp;
Kind regards,
&nbsp;
BrianL

SS-SysAdm · Answer

So we now have the certificates installed on the GS724TPV3. This is how we did it.&nbsp;Then as you can see we enable https&nbsp;&nbsp;&nbsp;However the same does NOT work for the&nbsp;GS724TPV2&nbsp;&nbsp;its just does NOT take the public certificate?&nbsp;X.509 Public Certificate PEM file update through HTTP did not complete.&nbsp;Yet does accept the private key.&nbsp;Does anyone know what the difference between&nbsp;GS724TPV2&nbsp;and&nbsp;GS724TPV3 when it comes to the public certificate. I am hitting my head against a brick wall now. It would be nice if the were some type of logging that I could to check to see what it is failing. Is that possible?&nbsp;&nbsp;

Forum Discussion

Configure SSL/HTTPS for GS724TPV2 and GS752TPv3

5 Replies

For GS752TPV3:

For GS724TPV2:

Related Content

GS724TPv2

PPPoE through GS724TPV2

Failures installing SSL certificate for TLS 1.2 (HTTPS) on M4300-52G-PoE+

GS724TPv2 won't factory reset

NTP sync GS724TPv2

NETGEAR Academy

ProSupport for Business