NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
GS510TLP and AGM731F SFP Module - NO LINK to TP-Link T2600G-52TS
Hello,
i have an new GS510TLP 8-Port POE Switch with 2x AGM731F SFP Modules.
The Swich have the latest Firmware 7.0.0.20 installed.
When i connnect the GS510TLP over the AGM731F SFP Modules with the TP-Link T2600G-52TS SFP Modules, i get no Link on the GS510TLP. The T2600G-52TS shows me the Link is UP.
How can i solve this problem ??
I have tried to switch off "auto-negotiation" on both switches, in the TP-Link GUI i can it switch off, but in the Netgear GUI can´t.
TP-Link Module TL-SM311LM
Netgear Module AGM731F
LWL Duplex OM2 (Multimode, 50/125) - 0,5m
4 Replies
Have a spare fiber patch cable at hand to test?
Hello schumaku,
i have tested the connection with a different cable (same type), but there is no difference,
the tp-link switch shows me an link on the sfp module (led indicator and web interface).
the Netgear shows me no link on the sfp module (led indicator and web interface).
i have tested both sfp ports on the netgear (port 9 and port 10) with different sfp modules and
i have tested two different sfp ports on the tp-link, with different sfp modules -> NO LINK ON THE NETGEAR SWITCH
so i think there is no faulty sfp module and no faulty cable.
it must be something else, maybe the firmware on the Netgear switch?
bad initial handshake?
There is no autonegotiation on SFP/SFP+ ports and fiber links - that's why I think Netgear is right not to show this control.
Get in touch with the Netgear support via https://my.netgear.com/
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
