NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Help connected Netgear Prosafe M7100-24X - ProSafe 24-port 10G Port-Channel With Cisco Nexus 7000
Hii, Im not used to using netgear, because i only have experience with cisco. I have netgear M7100-24X 24 port, and connected with cisco 2 Nexus 7000. I configure the netgear to nexus using ...
Hii Atian,
No, 1 Lag is fine, i already solved this problem :)
My netgear M7100 have 2port 10G connection through nexus700_1 and 2 10G connection to nexus7000_2 and its all at LAG_1. The problem is, i should activated the vpc at port-channel at nexus7000_1 and Nexus7000_2.... (doooohh this is my bad how do i miss something like this >.< )
So this case is closed, I now have 40G logical connection using LAG_1 at netgear to cisco Nexus7000_1 and Nexus7000_2
Im using 1 Lag at Netgear M7100 who is connected to both cisco nexus7000.
At nexus7000, just create port-channel and vpc for that connection (this is i forgot, adding vpc to port-channel netgear at nexus >.< )
Its SOLVED :)
Thanx DaneA for all your support, without your help i cannot find what is i miss ^.^
Regards,
-Kiky-
in normal LAG, its peer ports must on the same device. so you need to creat two LAGs on M7100 like below.
port-channel linktrap lag 1
interface 0/23
no auto-negotiate
speed 10G full-duplex
addport lag 2
exit
interface 0/24
addport lag 2
exit
interface 0/21
no auto-negotiate
speed 10G full-duplex
addport lag 2
exit
interface 0/22
no auto-negotiate
speed 10G full-duplex
addport lag 2
Hii Atian,
No, 1 Lag is fine, i already solved this problem :)
My netgear M7100 have 2port 10G connection through nexus700_1 and 2 10G connection to nexus7000_2 and its all at LAG_1. The problem is, i should activated the vpc at port-channel at nexus7000_1 and Nexus7000_2.... (doooohh this is my bad how do i miss something like this >.< )
So this case is closed, I now have 40G logical connection using LAG_1 at netgear to cisco Nexus7000_1 and Nexus7000_2
Im using 1 Lag at Netgear M7100 who is connected to both cisco nexus7000.
At nexus7000, just create port-channel and vpc for that connection (this is i forgot, adding vpc to port-channel netgear at nexus >.< )
Its SOLVED :)
Thanx DaneA for all your support, without your help i cannot find what is i miss ^.^
Regards,
-Kiky-
Hi bengkyo,
You're welcome! I'm so glad to know that the problem is now resolved. :)
Since the problem has been resolved, I encourage you to mark the appropriate reply as the “Accepted Solution” so others can be confident in benefiting from the solution. The NETGEAR Community looks forward to hearing from you and being a helpful resource in the future!
Cheers,DaneA
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
