I cannot access over https on OSver 12.0.17.9

---

---

htagawa wrote:

I recently updated my M4300 from version 12.0.15.4 to version 12.0.17.9. When I did so, I confirmed that I could no longer connect via HTTPS.

Before the work was done, http was disabled and https was enabled in the settings.

After performing the upgrade with that setting, the HTTP connection can access the AV UI, but not the MainUI, and the HTTPS connection is no longer available.

While there is no word about https in the release notes  - and taking into considerations you had to confirm you won't be able to connect via https, the release notes indicate some changes and enhancements https://kb.netgear.com/000065245/M4300-Firmware-Version-12-0-17-9 

Enhancements:

Adds an AV UI on the switch.
The AV UI is accessible over the default HTTP port 80.
The Main UI opens in a new tab/window.
The Main UI is accessible on HTTP port 49151. For example, http://10.1.1.1:49151/v1/base/cheetah_login.html

---

---

htagawa wrote:

I recently updated my M4300 from version 12.0.15.4 to version 12.0.17.9. When I did so, I confirmed that I could no longer connect via HTTPS.

Before the work was done, http was disabled and https was enabled in the settings.

After performing the upgrade with that setting, the HTTP connection can access the AV UI, but not the MainUI, and the HTTPS connection is no longer available.

Have read and followed the advise using http on port 49151 ?