Forum Discussion

robfantini

Aspirant

Jul 12, 2017

Solved

IP address is incorrect in logs.

we have a M4100-50G-POE+ lagged to a GSM7352Sv2.

logs for the M4100 on screen and at rsyslog server show the address for the GSM7352Sv2.

Note there is also a GSM7224V2 lagged to the GSM7352Sv2 . Its logs show correct address.

suggestions to fix? or is it a bug?

more info:

for the m4100:
logging console 7
logging host "10.1.3.46" ipv4 514 debug
logging syslog
logging cli-command

for gsm7352:
logging host "10.1.3.46" ipv4 514 info
logging syslog
logging cli-command

Troubleshooting

Retired_Member
Jul 18, 2017
robfantini

re: "1. Upload config-file from Switch" so just save a 'Text Configuration' . Correct?

no, you need to copy configuration file to laptop.

An example for CLI command:

First, setup one TFTP server on laptop(example IP is 1.1.1.1)

Second, execute command as 'save'

Third, execute command as 'copy nvram:startup-config tftp://1.1.1.1/m4100-config'

re: "Then erase the configure in the switch" . from cli what is the command for that?

execute command as 'clear config'

Then download the configuraiton file via CLI command as below:

copy tftp://1.1.1.1/m4100-config nvram:startup-config

18 Replies

robfantini
Aspirant
Jul 12, 2017

Note IP in logs is different then the http://10.1.8.4/base/cheetah_login.html I connect to.
- Retired_Member
  Jul 12, 2017
  Hi robfantini
  
  Welcome to the community!
  
  Please check the Management Interface configuration, is it same as your management VLAN IP?
  
  Web GUI go to 'System-->Management-->System Information', check the 'Management Interface' config.
  
  Hope it helps!
  
  Regards,
  
  EricZ
  NETGEAR employee
  - robfantini
    Aspirant
    Jul 13, 2017
    yes it looks to me to be the same. attached are screen shots