NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Netgear GSM7224v1 does not allow keyboard input in ezconfig via telnet connection
Hi, i recently bought an old Netgear GSM7224 Switch. It works fine so far but i have a little problem with "ezconfig" via telnet connection. I use PuTTY for telnet connection and i am able to...
i recently bought an old Netgear GSM7224 Switch. It works fine so far but i have a little problem with "ezconfig" via telnet connection.
I use PuTTY for telnet connection and i am able top connect and login to the console. But after starting "ezconfig" to configure passwords, static ip, i.e. "ezconfig" doesn't accept any keyboard inputs. Also the webinterface isn't reachale anymore from browser until i'll restart the switch.
Since you mentioned that the GSM7224v1 switch works fine and you just need to restart it in order to access its web-GUI, can you still navigate through its web-GUI? If yes, what is the current firmware of it?
If ever the firmware is not yet updated, I suggest you to update it to the latest version. The latest GSM7224v1 firmware is v6.2.0.14 and you can download it here. Then, observed if the same problem occurs.
Regards,
DaneA
NETGEAR Community Team
Hi,
Thanks for your answer.
Yes, after restart WebGUI is available and I am able to navigate.
The Firmware installed is the latest available v6.2.0.14
Are there any settings that have to apply in Webinterface of the Switch?
Thanks
StefanV3
Thanks for your answer.
Yes, after restart WebGUI is available and I am able to navigate.
The Firmware installed is the latest available v6.2.0.14
Are there any settings that have to apply in Webinterface of the Switch?
Thanks
StefanV3
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
