Forum Discussion

Aspirant

Jul 30, 2019

Problem Configuring VLAN routing OSPF M4300-12X12F FW 12.0.4.8

Hi, We just bought M4300-12X12F for a storage project. Attached is the network diagram for reference. I need to create a VLAN 172. I have configured the Netgear to communicated with Cisco Nexus 7...

Aspirant

Aug 10, 2019

Hello Retired_Member

I am not very familiar with CLI commands. We did the configuration mostly on the GUI interface. It is so weird that we repeated the process following the guide from below link and it never worked. When we are about to give up, and tried doing the same process the last time, some how the vlan suddenly became active and the network is running fine. We will keep observing this and will keep you guys updated.

https://kb.netgear.com/21694/How-do-I-configure-VLAN-routing-Open-Shortest-Path-First-OSPF-using-the-web-interface-on-my-managed-switch

Thanks

Retired_Member

Aug 14, 2019

joeyang

Ok, thanks for your updates.