NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
POST Issues GSM4248UX
Hi, the power on start of self teset on my
GSM4248UX is failing. I power on the switch and it starts with the test. All of the ports in the back of the unit light up for a few seconds. The power L...
After working with Netgear support, they idenfy this to be a hardware issue specifically with the power module.
The switch’s PoE subsystem is failing to initialize at boot. Evidence from the technical logs shows: ⦁ PSE remains OFF and “Get PoE FW Failed” is reported. ⦁ show poe port info all returns only headers (no port table), which occurs when the PoE controller is not up. ⦁ No OS/kernel crash dump is present; system uptime and boot logs are otherwise normal aside from transient driver buffer warnings. ⦁ Thermal and fan readings are normal; PS‑1 and PS‑2 are operational (PS‑3 not powered is non‑blocking).
Just putting out there for anyone facing a similar issue. Keep in mind any warranty for your hardware.
Had ever connected the console as suggested earlier?
One would expect these problems as also recorded in the tech logs would become visible.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
