GS324T - Seems that 10/100 devices will not connect properly

Hello,

I just purchased a used GS324T switch.  I have Port 1 plugged in to a Nighthawk wireless router.  The wireless router is connected to a cable modem.  All wireless clients on the Nighthawk work.  All 10/100 and Gig devices plugged directly in to the Nighthawk work.

None of the 10/100 connections plugged in to the GS324T appear to work.  Those ports who have 10/100 devices connected blink orange, but those devices are unable to connect to anything.  These 10/100 connections aren't very intelligent (Chamberlain MyQ, Samsung TV, Roku 3), so troubleshooting is limited.  When I plug these connections directly in to the Nighthawk, they work properly.

I connected a laptop with a 1gig network ethernet card in to one of the network jacks that a Roku 3 was plugged in to (wireless was disabled on the laptop).  The laptop connected to the ethernet network just fine and was able to reach the internet.

I am currently running firmware 1.0.0.27.  There was a second image with the 1.0.0.16 firmware on it.  I activated and booted to it and got the same results.