NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
GS724T unable to read the MAC address using SNMP
I connect a device with a MAC on port 1 of the switch. Normally I used a MIB library called BRIDGE-MIB that if I put the OID to find the port followed by the MAC I am looking for, in decimal, the swi...
Finally I solved with the following OID:
1.3.6.1.2.1.17.7.1.2.2.1.2.1.0.64.157.62.182.191
where 0.64.157.62.182.191 is the MAC address of my device.
Thanks for your help.
Thanks for the feedback. To isolate the problem, kindly try using the NMS300 and check if you can accomplish your goal.
Regards,
DaneA
NETGEAR Community Team
Finally I solved with the following OID:
1.3.6.1.2.1.17.7.1.2.2.1.2.1.0.64.157.62.182.191
where 0.64.157.62.182.191 is the MAC address of my device.
Thanks for your help.
Thanks for the update. I'm glad to know that the problem got resolved. :)
Since your concern is now resolved, I encourage you to mark the appropriate reply as the “Accepted Solution” so others can be confident in benefiting from the solution. The NETGEAR Community looks forward to hearing from you and being a helpful resource in the future!
Cheers,DaneA
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
