NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
JFS524E cannot access neither reset to factory default
Hi, I am trying to set up a ProSafe JFS524E (unmanaged plus) switch. I don't have a dhcp server on my network, so I have connected my PC directly to the switch, set up IP as 192.168.0.210/24, d...
they replaced it with a JGS524Ev2, which works.
Thanks,
Andrea
That's not good. How about connecting it to a DHCP server just to check if it will be receiving an IP? Then run the ProSAFE utility.
Regards,
JohnC_Vwrote:
That's not good. How about connecting it to a DHCP server just to check if it will be receiving an IP? Then run the ProSAFE utility.
Regards,
I have just set up a (linux) DHCP server on the fly. Double-checked the server config and tried it, by connecting a linux client PC, and the DHCP server works. Then I tried these steps:
- connected the switch to the DHCP server
- turned the switch on
, and the server does not show any lease granted.
then
- connected the client to the switch
, and the client regularly obtains the lease.
So it seems the device is not able to obtain a DCHP address.
Double checked the behavior with one other device also, same result. That's really weird isn't it?
That's weird. Have you even tried to use the other JFS524E so that we can isolate?
Regards,
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
