NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Only the GS308 series loses connection from the Wi-Fi router
When I connect a Sony Wi-Fi router(NSD-G1000T) to Port 1 of a GS308 series switch, it receives an IP address from the DHCP server and functions as a switch for the first 3-5 seconds.
My PC con...
schumaku
>Ensure STP (RSTP) et all (like the Loop Prevention) are disabled, and try again.
That (STP) setting (default: ON) was the cause of this issue!
I didn't fully understand STP, so I couldn't fully utilize your comments.Thank you again for following up.
I wanted VLAN functionality, but it seems I was buying a device beyond my level of knowledge. I need to learn more about the device I purchased (GS308T).
A GS308 is an unmanaged switch, nothing to configure.
Or are we facing any kind of GS308E, GS308EP, or GS308EPP?
Unlikely with such a simple config, the Easy Smart Essentials Switches (PoE or not), but also the GS108E the OP is referring to, have a feature called LOOP DETECTION. If in doubt, disable this feature - especially if paired with some more sophisticated Mesh WiFi system, eg. used as a wireless access point.
Are you connecting the 2.5 gbps port in the router to the switch?
This has no impact on the switch at least.
This has no impact on the switch at least.
It shouldn't, unless there is a compatibility issue in the router ethernet. Perhaps not likely, but easy to test.
especially if paired with some more sophisticated Mesh WiFi system, eg. used as a wireless access point
The Sony router appears to be a stand-alone router, not a mesh. Though I can't read Japanese, so I can't get much info from the manual...
schumaku wrote:
especially if paired with some more sophisticated Mesh WiFi system, eg. used as a wireless access point
The Sony router appears to be a stand-alone router, not a mesh. Though I can't read Japanese, so I can't get much info from the manual...Wrong. Work on your Japanese language please - it is an EasyMesh compatible system 8-)
Together with the Sony NSD-M1000 it can make-up a mesh system...
schumaku
Thank you for your advice.I confirmed the setting of the GS308T.
I had proceeded factory reset at the previous investigation procedures, and the confirmed setting: the loop protection setting was OFF.I also confirmed the settings of the Sony router, but I could not find sittings regarding these loop protection/detection functions.
I am still having issues, but I appreciate your support.
...setting of the GS308T.
Again a totally different beast. That's why the community does always request the exact device make and model.
These GS308T (might) have Spanning Tree Protocol (STP) enabled by default - as these are standard for business and enterprise class networking devices - something these kind of Easy Mesh and similar are simply highly incompatible (just like the Loop Prevention the GS308E does have) to these wonderful Mesh **** - albeit always calming it's IEEE compliant. All makers of these wonderful MEsh systems don't tell the uneducated customers that only so called "unmanaged" switches can be used - the reasons are Loop Prevention and even more STP. These systems do -not- accept the same MAC address appearing on different switch ports or networks.
Ensure STP (RSTP) et all (like the Loop Prevention) are disabled, and try again.
schumaku
>Ensure STP (RSTP) et all (like the Loop Prevention) are disabled, and try again.
That (STP) setting (default: ON) was the cause of this issue!
I didn't fully understand STP, so I couldn't fully utilize your comments.Thank you again for following up.
I wanted VLAN functionality, but it seems I was buying a device beyond my level of knowledge. I need to learn more about the device I purchased (GS308T).
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
