NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Set the command line banner on GS724T v4
I'm setting up a small network at my company. I've been able to do most of the setup required using the web interface. There's something I've been trying to do, that I can't figure out how to do. ...
After poking around using telnet, I was able to set the command line banner. I started out in Privileged Exec mode, using enable, and then going to Global Config mode, using config.
In config mode I was able to use set clibanner to enter a double-quoted text string.
Thanks for the reply DaneA.
I kind of expected that would be the answer, but I was hoping for a workaround, given that I was able to access the switch via telnet and use several of the commands.
I'll need to get with mgmt and see how they want to proceed; either except the way things are or consider purchasing a managed switch.
After poking around using telnet, I was able to set the command line banner. I started out in Privileged Exec mode, using enable, and then going to Global Config mode, using config.
In config mode I was able to use set clibanner to enter a double-quoted text string.
Thanks for the update and sharing how you set the banner via telnet on the GS724Tv4 switch. This will help other community members as well. Kudos to you! :)
Feel free to post your future concerns here in the community.
Cheers,
DaneA
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
