NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
WMS5136 can't discovery WG103 or WNDAP350
I cannot discovery any of my access points after upgrading the firware in my WMS5316 to v2.1.7. My access points are as follows:
WG103 firmware v2.2.5
WNDAP350 firware v3.7.9.0
I have tried...
I checked a number of times, and yes, SNMP is enabled in all the WG103s
Hi jeffsoltor,
As per checking, I found out that the firmware of your APs is suitable for the latest firmware of the WMS5316.
Have you checked if the IP address of the APs are on the same network with the WMS5316?
Here is the reference.
Regards,
Yes, all my APs are on the same network as the WMS5316. My WMS5316 could discover all my APs before upgrading to firmware v2.1.7. I have even tried downgrading to v2.1.5, but still cannot discover APs.
Hi,
Can you make sure the firmware in WMS5316 is 2.1.7
and WNDAP350 is 3.7.9.0
1. Login to the WNDAP350 and Disable the cloud mode.
2. Login to the WNDAP350 and enable the SNMP.
after discover the AP, it should work fine.
Hi,
Please follow the guidelines provided in the document attached, which will help you to discover and manage the APs.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
