NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
WMS5136 can't discovery WG103 or WNDAP350
I cannot discovery any of my access points after upgrading the firware in my WMS5316 to v2.1.7. My access points are as follows:
WG103 firmware v2.2.5
WNDAP350 firware v3.7.9.0
I have tried...
I checked a number of times, and yes, SNMP is enabled in all the WG103s
Hi,
For WG103s: 192.168.0.131 to 192.168.0.142
Please make sure SNMP is enabled on these APs.
Can you use the IP discovery option by giving the Start IP as 192.168.0.131 and end IP as 192.168.0.142
you can find the option in the following tab.
Configuration->Access Point Discovery->Discover Access Point->IP Discovery
I checked a number of times, and yes, SNMP is enabled in all the WG103s
I overlooked putting in the default IP address for SNMP. All my APs are now connected and synchronized to my WMS5316.
Thanks very much to the Community !
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
