NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Help troubleshooting rndp6000
I am troubleshooting some issues with new old (newly acquired) RNDP 6000 100NAS.
This board won't allow me to post my log in zip format.
Not sure if disk network or other problem. Trouble with writing to NAS from computer with Acronis true image 2019.
p.s. some of the higher temperature operation is when I had the A/C off of minute and should not be an issue.
Please advise.
nickel22222 wrote:
The wifi uses your Netgear DC112A-100NAS cradle with ATT wifi hotspot.
Uses "ac" I think.
It's not mine - I don't work for Netgear (neither does anyone else you've been connecting with here). This is a community forum, you are talking with other users.
It is an 802.11ac device (2x2 in the 5 ghz band), so you should be seeing better speeds if you are close to the cradle. Perhaps confirm that you are connecting to the 5Ghz band.
32 Replies
Replies have been turned off for this discussion
nickel22222 wrote:
This board won't allow me to post my log in zip format.
There is some privacy leakage if you post the full log zip file, so please don't do that.
It's fine to cut/paste a small section though.
nickel22222 wrote:
Not sure if disk network or other problem. Trouble with writing to NAS from computer with Acronis true image 2019.
Are you seeing any issues reading/writing to a NAS share? You can use Nastester to test this: http://www.808.dk/?code-csharp-nas-performance.
i typed in the ip address 192.168.100.21 and get errors.
NAS performance tester 1.7 http://www.808.dk/?nastester
Running warmup...
An error occured: Could not find a part of the path '192.168.100.21\1test.tmp'.
Running a 400MB file write on 192.168.100.21 5 times...
An error occured: Could not find a part of the path '192.168.100.21\1test.tmp'.
Running a 400MB file read on 192.168.100.21 5 times...
An error occured: Could not find a part of the path 'C:\Users\AsuS\Downloads\NASTester_17\192.168.100.21\1test.tmp'.You're entering the wrong thing. You need to specify a NAS share as the destination, and you need use the UNC format.
For instance, if you have a share called Media, enter \\192.168.100.21\Media in the network path field. Note the direction of the slashes - that matters.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
