NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

ianhigh's avatar
ianhigh
Aspirant
Oct 14, 2016

ReadyNAS DUO RND2120 Password reset

I have an old ReadyNAS DUO that has been out of service for a while.

The admin password is no longer known, nor is the password recovery answer.

 

My understanding is that the default credentials ought to be

admin password ( all lower case, no punctionation, no numbers)

 

When I got the NAS it was configured with a hostname, static Ip address and had a password recovery page option.

 

So far I have:

performed a password reset via reset button

    hold reset in for 5 seconds, wait for boot to finish

made absolutely no difference ( I understand this option has to have been enabled first, before it will work)

 

Then performed an o/s reload

   hold reset button in for about thirty seconds until disk leds have flashed twice.

   left unit on overnight

unit has now defaulted to be a dhcp client, with host name of NAS-77-B7-C5

RAIDar shows it as ReadyNAS DUO, Healthy, firmware version 4.1.8

Attempts to reach http://{ipaddres}/password recovery now give a 404 error

logging in to http://{ipaddress}/admin does NOT allow me in with admin / password

Tried using Edge on Windows 10, Chrome, Firefox and IE11

 

One:  does the change of hostname and IP address mean the O/S has been sucessfully reloaded ?

Two: should the default admin login now be admin / password ?

Three: Is there any limitations as to which browser I need to use or special settings. ( I have already told all my browsers to ignore certificate errors)

 

My final option is to do a firmware re-load. However, I am not sure;

a) where to get the firmware source (i.e. what version do I need ? )

b) how to perform a local install. Is this by using one of the two options TFTP Boot or USB Boot ? If so, how do I configure the source ?

 

3 Replies

Replies have been turned off for this discussion
  • OK, scratch the above.

     

    I managed to get in using admin / netgear1

     

    Would be nice if the default passwords were listed somewhere - but the entire site is pretty much un-navigable.

    Would still like to know what is the latest firmware I should be using for the above device

    ReadyNAS DUO RND2120-100UKS v2

    Shows in RAIDar as ReadyNAS DUO Firmware 4.1.8

     

    Admin page shows

    ReadyNAS DUO X-RAID

    Firmware 4.1.8 (1.00a043)

     

    Would also still like to know whwre and how to do a firmware upgrade (if there is one)

     

    Also disk in unit is pretty much fried. What is the largest replacement I can use?

    Currently has a signle 2Tb - Can I replace with two 4Tb and put into RAID1?

     

    • StephenB's avatar
      StephenB
      Guru - Experienced User

      ianhigh wrote:

       

      Would still like to know what is the latest firmware I should be using for the above device

       

       


      4.1.15  - http://kb.netgear.com/app/answers/detail/a_id/30914/~/raidiator-version-4.1.15-(sparc)

       

      If you download and install manually, you need to extract the firmware from the zip file.


      ianhigh wrote:

       

      Currently has a single 2Tb - Can I replace with two 4Tb and put into RAID1?

       


      No, the max disk size supported by your older ReadyNAS is 2 TB.  It doesn't support GPT formatting.  

       

      I'd recommend WD20EFRX (WD "Red") drives for your NAS.  Seagate Ironwolf (ST2000VN000) are another option.

      • ianhigh's avatar
        ianhigh
        Aspirant

        Hi Stephenb.

         

        Thanks for your help.

        NAS all upgraded and singing like new.

        Thanks once again.

         

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More