WD10EADS WD Caviar Green - 1TB >> excessive Load Cycle Count

I am just coming about this thread, as i installed a few more WD Green drives (1.5TB) in a new NVX unit and saw that WD special bin i can download.

Now, on a NV+ unit, that is using 4 WD Green 1TB drives (all the same part numbers), i see the following (at the end):

11440 power on hours
684276 LLC count

That is an avg. of 60 LLCs per hour. So far the drives report no other issue (like sectors defect etc). They are just happy as can be.

Not sure if there was ever an official answer if the high LLC count is, in fact, a problem. But if so, it seems to take a while.

Frank

Model: WDC WD1000FYPS-01ZKB0
Serial: WD-WCASJ1740341
Firmware: 02.01B01
SMART Attribute
Raw Read Error Rate 0
Spin Up Time 7741
Start Stop Count 108
Reallocated Sector Count 0
Seek Error Rate 0
Power On Hours 11440
Spin Retry Count 0
Calibration Retry Count 0
Power Cycle Count 108
Power-Off Retract Count 139
Load Cycle Count 684276
Temperature Celsius 41
Reallocated Event Count 0
Current Pending Sector 0
Offline Uncorrectable 0
UDMA CRC Error Count 0
Multi Zone Error Rate 0
ATA Error Count 0

Extended Attribute
Hot-add events 0
Hot-remove events 0
Lp stat events 0
Power glitches 0
Hard disk resets 0
Retries 0
Repaired sectors 0