NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
New Transmission 2.84 add-on for ReadyNAS Duo/NV+ (sparc)
This is a newly compiled version for the Duo straight from source. It has been configured with "--disable-nls --enable-lightweight --enable-utp" and the default web interface port of 9091.
If it doesn't work after installation, try rebooting.
Not sure if it can be install over the top of super-poussin's version, but if you are planning on uninstalling super-poussin's version then remember to save the torrent files somewhere else first.
To quote myself:
Thanks to super-poussin for the original Transmission add-ons.
Enjoy!
Transmission_2.73.bin - http://www.mediafire.com/?ajpyyc7ujv54o37 no-utp
Transmission_2.75.bin - http://www.mediafire.com/?gbmbhu3hrabf9fe
Transmission_2.76.bin - http://www.mediafire.com/?389i53w9w9rtosm
Transmission_2.77.bin - http://www.mediafire.com/?pm420vuajaim9bz
Transmission_2.80.bin* - http://www.mediafire.com/?5s7dag8ko72doj1
Transmission_2.81.bin* - http://www.mediafire.com/?x4pvvidrgb36df2
Transmission_2.82.bin* - http://www.mediafire.com/?rbctsdae000zoav
Transmission_2.83.bin* - http://www.mediafire.com/?31iul25i0t12qda
Transmission_2.84.bin* - http://www.mediafire.com/?rh5fge4mc8ahzw4
*if the "Upload" button doesn't work or the "Destination folder" field is blank, reload the webpage.
If it doesn't work after installation, try rebooting.
Not sure if it can be install over the top of super-poussin's version, but if you are planning on uninstalling super-poussin's version then remember to save the torrent files somewhere else first.
To quote myself:
tarobun wrote: It looks like upgrading from Transmission 2.42 to this Transmission add-on is a no-no. Sounds like there are conflicting configuration that screws up both installs. :( (eg. /c/addons-config)
It seems the best approach is to fully uninstall the old, delete the config directory, and then install this add-on. Once you're on this add-on, updating is straightforward and can be done over the existing version.
Just a fyi - the default download dir is /var/local/Downloads and there is no username and password with this add-on. If you are prompted for them then the old version was not fully uninstalled.
Thanks to super-poussin for the original Transmission add-ons.
Enjoy!
Transmission_2.73.bin - http://www.mediafire.com/?ajpyyc7ujv54o37 no-utp
Transmission_2.75.bin - http://www.mediafire.com/?gbmbhu3hrabf9fe
Transmission_2.76.bin - http://www.mediafire.com/?389i53w9w9rtosm
Transmission_2.77.bin - http://www.mediafire.com/?pm420vuajaim9bz
Transmission_2.80.bin* - http://www.mediafire.com/?5s7dag8ko72doj1
Transmission_2.81.bin* - http://www.mediafire.com/?x4pvvidrgb36df2
Transmission_2.82.bin* - http://www.mediafire.com/?rbctsdae000zoav
Transmission_2.83.bin* - http://www.mediafire.com/?31iul25i0t12qda
Transmission_2.84.bin* - http://www.mediafire.com/?rh5fge4mc8ahzw4
*if the "Upload" button doesn't work or the "Destination folder" field is blank, reload the webpage.
159 Replies
Replies have been turned off for this discussion
- just a thought. It might be time to include info such as default user, and passwords, the info is buried in older threads, where new users wont find them if / when they look for them. And i can t for the life of me remember what they are, or i would have put it here. It should be in the first post really...
B! - Hi,
I've received a ReadyNAS NV+ v1 this week by a friend as a present, it's an used unit, but it looks as a new one :) I've installed 4.1.11 and Transmission 2.77 on it.
I don't know so much about this unit, but something is going wrong with this add-on. I've modified rpc-username and rpc-password, and enabled rpc-authentication, as you can see in the following capture.
With this settings, that have been modified through Apple Terminal through SSH, there's no way to log in Web Interface :( So I decided to disable authentication...
In other hand is that it's downloading very very very slow... there's any hide setting or something weird that must be changed??
Thanks!!!!! - Define very slow? This isn't a very fast unit.
Also, check your memory requirements, and if you got upgraded memory in your box or if it's the stock 256MB.
B! - When I say very slow I mean the downloading connection. I've a laptop which I only use for downloading. It's connected to the router through wireless connection and the download speed is 900-1200kb/s. The NAS is downloading only up to 400kb/s connected through wired ethernet... :(
It has only 256MB, I've bought 1GB but I'm still waiting the shipment.
Where can I check the memory requirements??
Thanks for your reply!!!!! :) - There isn't any official "memory requirements" to be checked against as far as i know of, but it's a fairly well known fact that performance suffer with the original memory amount. But in my world you should still be able to get more then 400kB/s. I've been running in the area 2-3MB/s, with the rare 4MB/s showing it's ugly face every week with 2 Sundays in it. I'm not sure, but i don't think anyone squeezed more speed out of transmission then that. You can check cache size, turn off, or set encryption to optional, to try and get a weee bit more, but thats about it.
B! - I have installation file for Transmission 2.42. It is Transmission_2.42.bin. Size of this file on disk is 21 171 KB. I have also installation file for Transmission 2.77, which is Transmission_2.77.bin. Size of this file on disk is only 1 791 KB. I didn't try to install 2.77 yet. Could you tell me if it's all right that 2.77 installation file is so much smaller that 2.42?
Trukhin wrote: Hmm... Build size reduced from ~20 MB to ~2MB (2.42 -> 2.76)? tarobun wrote: Yep, that's the file size with all debug symbols stripped.
B!- Thank's a lot :-)
- Just upgraded by first making copy of configuration files from 2.42, then uninstall of 2.42, install 2.77, copy configuration files to /c/addons-config/Transmission/ and it seems to work fine! Thank's a lot guys :-)
- I ahve today loaded transmission 2,77 sparc to My ReadyNas Duo, but it wont run any downloads and keeps telling me that it could not connect to the server, help.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
