NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

pjz28ss's avatar
pjz28ss
Aspirant
Oct 26, 2015
Solved

How do I get full 2.0GB Volume size on SPARC Based ReadyNAS Duo?

I recently added a second 2.0GB drive to my ReadyNAS Duo hoping to get to the max spec for the SPARC based Duo.  When the sync was complete the volume indicated 1.3GB.  I have read that RAID-X has a max of 1.3GB with 2.0GB drives and RAID-1 would indicate 1.8GB for 2.0GB drives. How do I change from RAID-X to RAID-1 in the ReadyNAS Frontview?

  • X-RAID should automatically expand.

    If you use disk spin-down you should disable that. You should also make sure that the "Disable Journaling" option is not checked.

     

    If you need to make changes to those settings. After applying them reboot the NAS again.

6 Replies

Replies have been turned off for this discussion
  • mdgm-ntgr's avatar
    mdgm-ntgr
    NETGEAR Employee Retired

    Have you tried a reboot?

     

    1.3 is what you would expect with 2x1.5TB drives.

      • mdgm-ntgr's avatar
        mdgm-ntgr
        NETGEAR Employee Retired

        2 GB is about half the capacity of a DVD or about 3 CDs worth of data. So 2TB drives would be what was meant.

    • pjz28ss's avatar
      pjz28ss
      Aspirant

      I have previously shutdown the NAS using on/off button, but not shutdown and reboot from Frontview with volume scan checked. After this is completed, I got a log message that the first stage has been completed and sync was in progress, and shutdown was required to complete volume expansion.  I initiated shutdown with reboot from Frontview a second time.  The volume now indicates the proper size. Thank you for your suggestion.  I did not realize the differences in terminology.

  • No success with reboot. I have read that, with two 2GB drives in Raid1, I should expect 1.8GB total. With a RaidX setting, I should expect 1.3GB. I am getting 1.3, but would like to set volume to Raid1 to get 1.8 GB. I do not see the option to change Raid setting. If I removed drive and started rebuild again will I have option to set Raid1?
    • mdgm-ntgr's avatar
      mdgm-ntgr
      NETGEAR Employee Retired

      X-RAID should automatically expand.

      If you use disk spin-down you should disable that. You should also make sure that the "Disable Journaling" option is not checked.

       

      If you need to make changes to those settings. After applying them reboot the NAS again.

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More