Hi I am unable to upload any files to the NAS since downloading windows 10. Every time I click on the NAS folder in the network it advises that windows can not access my NAS displaying error code 0x080070035 network pathway nopt found. Action taken: A default reset with still the same outcome with the NAS is working in the ready cloud and NAS settings. I feel that it is just a network setting issue and have tried changing file access settings and static IP address to no effect. I hope you can help as I have spent 2 days trying to fix the problem. Cheers

Try opening cmd and running two commands: net use * /delete net use t: \\nasipaddress\data /user:admin nasadminpassword The second command should map the NAS data volume to drive letter t. Note I am suggesting using the IP address of the NAS instead of its name. Be careful on the slash direction.

BenvandenB wrote: when the PC is powered down and started up again, the connection with the t: drive is not found anymore. It is dismounted when the PC shuts down. BenvandenB wrote: I have pinged the NAS by IP and get a response with the IP address. When I ping the NAS by its name NAS-34-F9-F8 I get a response from fe00::2ac6:8eff:fe34:f9f9%5 When I use the "net use t:" command with the NAS name it also puts the NAS in the device list as drive T with the IP address as the name. Please note that the NAS is shown in the Explorer Network devices with its name all the time, next to the PC's etc. (but when clicking on this you get the error message) This all points to a NAS credential issue in the windows system. You can run the windows credential manager by entering "credential" in the search pane on the taskbar, and clicking the program. Select "Windows credential" and delete anything you see for the NAS (name or IP address) The add a windows credential, specifying the NAS Name, username (\\nasname\admin) and the password. Persistence should be "enterprise". You can enter a second one for the NAS IP address if you like.

What firmware are you running on the NAS? Did you assign the PC and the NAS to the same workgroup?

same problem here, cant connect to the drive maps, red crosses on the links under network. i can ping the address and connect to the management console but no access to the drive maps.also readycloud cannot find my nas, cant figure out what the problem is exactly.

also im running a windows 10 and firmware 6.5.1

Network error code: 0x80070035 | NETGEAR Communities

22 Replies

Replies have been turned off for this discussion

StephenB
Guru - Experienced User
Apr 10, 2016
What firmware are you running on the NAS?

Did you assign the PC and the NAS to the same workgroup?
- jimmyv
  Aspirant
  Jun 26, 2016
  same problem here, cant connect to the drive maps, red crosses on the links under network. i can ping the address and connect to the management console but no access to the drive maps.
  also readycloud cannot find my nas, cant figure out what the problem is exactly.
  - jimmyv
    Aspirant
    Jun 26, 2016
    also im running a windows 10 and firmware 6.5.1
BenvandenB
Aspirant
Jul 05, 2016
Hi Brian. i exwcuted the command net[space]use[space]*[space]/delete. After this the NAS initially was gone as network device in explorer. Only the main PC was left seen. The it reappeared in the list and when trying to access I got the same error message again. How can I clear all ReadyNas login?
Thanks, Ben
BenvandenB
Aspirant
Jul 05, 2016
By the way, I am running Norton Antivirus on this PC.
- StephenB
  Guru - Experienced User
  Jul 05, 2016
  Try opening cmd and running two commands:
  
  net use * /delete
  
  net use t: \\nasipaddress\data /user:admin nasadminpassword
  
  The second command should map the NAS data volume to drive letter t. Note I am suggesting using the IP address of the NAS instead of its name. Be careful on the slash direction.
  - BenvandenB
    Aspirant
    Jul 05, 2016
    Dear Brian, I am not sure on the syntax since all I used went wrong. To access the NAS admin I normally use my email address plus a password with upper and lower case letters.
    What do I fill in at "user:admin" ?
    Ben

Forum Discussion

Network error code: 0x80070035

22 Replies

Related Content

errore 0x80070035 impossibile accedere a ...

Errore 0x80070035 win 10 2004

codice errore 0x80070035 RNas 104

Re: No files in file explorer Windows 10 error 0x80070035 ?

network

NETGEAR Academy

ProSupport for Business