NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Uncontrolled power-ups with RN Pro after Raidar Upg.
After upgrading my ReadyNAS Pro to RAIDiator 4.2.12, I now experience uncontrolled system starts. System now boots up uncontrolled at least three times a day when turned off. Of course, scheduler a...
NOPE, Problem persists, EVEN after applying the latest FW RAIDator 4.2.16 + RAIDar 4.3.1...
My ReadyNAS Pro always turns off on time as programmed too, but RANDOMLY TURNS ON, some days it does, and some days it doesn't (so I have to go push the botton). This is a problem if I'm not in the premises and still want to use the scheduled power-on/off feature!
My ReadyNAS Pro is connected to a Trednet Green 8-port Gigabit Ethernet switch, not sure if this could be the problem (don't see how but who knows at this point!). Also I have a replacement unit, not sure if my replacement unit may be defective... NEVER HAD THIS PROBLEM WITH MY ORIGINAL PRO UNIT, or my ReadyNAS NV+ which I currently use to back up my PRO. My ReadyNAS NV+ ALWAYS turns off/on as programmed to and is hooked to the same ethernet switch my Pro is.
Last time I call support I was told that for some reason my ReadyNAS PRO time was off for some "strange" reason, so I changed the time servers it was looking at. When that failed I ran the timer internally, and still had problems. I then replaced the internal battery thinking it may have run out of juice, but that did not solve the problem either.The FW update seems to claim it solve some synch issues for the power saving options, but I still have a problem.
ANY SUGGESTIONS?
My ReadyNAS Pro always turns off on time as programmed too, but RANDOMLY TURNS ON, some days it does, and some days it doesn't (so I have to go push the botton). This is a problem if I'm not in the premises and still want to use the scheduled power-on/off feature!
My ReadyNAS Pro is connected to a Trednet Green 8-port Gigabit Ethernet switch, not sure if this could be the problem (don't see how but who knows at this point!). Also I have a replacement unit, not sure if my replacement unit may be defective... NEVER HAD THIS PROBLEM WITH MY ORIGINAL PRO UNIT, or my ReadyNAS NV+ which I currently use to back up my PRO. My ReadyNAS NV+ ALWAYS turns off/on as programmed to and is hooked to the same ethernet switch my Pro is.
Last time I call support I was told that for some reason my ReadyNAS PRO time was off for some "strange" reason, so I changed the time servers it was looking at. When that failed I ran the timer internally, and still had problems. I then replaced the internal battery thinking it may have run out of juice, but that did not solve the problem either.The FW update seems to claim it solve some synch issues for the power saving options, but I still have a problem.
ANY SUGGESTIONS?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
