8-stream AX WiFi Gateway (CAX80)

[Matthew617]

I have 1 gig service from Spectrum and the ethernet connections tops out at 450-600 while my 5g wireless is 1100.  Spectrum came and checked the line and all was good.

I can't see any  obvious setting issues- any suggestions?  I used both the Olka speedtest app and the Nighthawk one...

Any suggestions or help would be greatly appreciated.

[FURRYe38 · Accepted solution]

Glad you got it working. Please mark your thread as solved so others will know. Be sure to save off a back up configuration to file for safe keeping. Saves time if a reset is needed.
https://kb.netgear.com/24231/How-do-I-back-up-the-router-configuration-settings-on-my-Nighthawk-rout...
Enjoy. 📡

[FURRYe38]

What Firmware version is currently loaded?

What ethernet device are you speed testing with? 

What CAT# cable are you using? CAT6 is recommended. 

Is ethernet device connected to the Multi Gig port or a 1Gb port? 

Is Armor, or traffic meter enabled? 

[Matthew617]

HP Laptop

Cat8

I've tried all the ports, port aggregation is not enabled.

Armor Not Active

Traffic Meter

Cancel Apply

Internet Traffic Meter Enable Traffic Meter Traffic volume control by               No limit              Download only              Both directions              Monthly limit

Firmware Version	V2.1.3.7
Cable Firmware Version	V1.02.08

[FURRYe38]

So I Traffic meter enabled, hard to tell. 

Try a different ethernet device? 

Has a factory reset and setup from scratch with out Armor or Traffic Meter being enabled and see? 

[Matthew617]

The factory reset worked- It's up to 850...thanks!!!

[FURRYe38 · Accepted solution]

Glad you got it working. Please mark your thread as solved so others will know. Be sure to save off a back up configuration to file for safe keeping. Saves time if a reset is needed.
https://kb.netgear.com/24231/How-do-I-back-up-the-router-configuration-settings-on-my-Nighthawk-rout...
Enjoy. 📡

[Matthew617]

Resolved!  Thanks!