Orbi WiFi 7 RBE973
Reply

c7000v2

marcus24
Aspirant

c7000v2

My router modem disconnects several times a day,then it says authentication error if I log in to my wifi,If I unplug power after 30mins to hours It will automaticly connect again sometimes it works mkst kf the time it doesnt even if im connected.pls help
Model: Dual Band
Message 1 of 13
plemans
Guru

Re: c7000v2

do all devices drop? 

Just wireless devices? 

Do wired devices still work?
Do you have a screen snip of the cable connections page and the event logs? 

 

Also, you posted in the routers forum and the C7000 is a modem/router combo device. 

https://community.netgear.com/t5/Cable-Modems-Routers/bd-p/home-cable-modems-routers

Message 2 of 13
marcus24
Aspirant

Re: c7000v2

yes all the wireless drop,for the wired I am not sure bec.we dont have any.Im sorry im not a very tech savy,I dont know how to check the event log but i will find it,is that in the net genie?or router login? im considering buying a new 1 in costco,netgear try to charge me $49+ for 1 time help,it cost 150 in costco foe a new one.
Message 3 of 13
plemans
Guru

Re: c7000v2

here's how to get the event log:

https://kb.netgear.com/30008/How-do-I-obtain-the-event-logs-from-a-NETGEAR-cable-modem-modem-router

 

and the cable connections page. 

https://kb.netgear.com/30007/How-do-I-obtain-the-cable-connection-information-from-a-NETGEAR-cable-m...

 

I'd recomnmend trying that first. Its pointless to buy a new modem if its a line issue. 

Also, check the coax line for bad/old/loose connection, kinks in the coax, extended runs. 

remove any splitters, amplifiers, or attenuators in line. 

I usually recommend moving the modem to right where the coax comes into the home to prevent the issue from being the wiring in the home. 

 

Message 4 of 13
marcus24
Aspirant

Re: c7000v2

thank you for the help, will get the information once Im home, I called netgear last night and mentioned about channel not being stable and mac address somethin like that but will not continue until I pay. Connection is still on and off,the modem will blink 2.4ghz and 5ghz then will stop

Message 5 of 13
marcus888
Aspirant

Re: c7000v2

 
Message 6 of 13
marcus888
Aspirant

Re: c7000v2

here is the event logs
Message 7 of 13
marcus888
Aspirant

Re: c7000v2

thank you for your help
Message 8 of 13
marcus24
Aspirant

Re: c7000v2 ac1900

 
Model: Dual Band
Message 9 of 13
plemans
Guru

Re: c7000v2 ac1900

theres an @marcus24 and a @marcus888 posting on here. 

I understand marcus 24 is the original poster. Is 888 piggybacking on here or just another account for the same person?

Message 10 of 13
marcus24
Aspirant

Re: c7000v2 ac1900

its the same, thanks plemans

Message 11 of 13
plemans
Guru

Re: c7000v2 ac1900

Your signal strength looks good but your logs indicate issues. 

Have you checked with your isp? 

Message 12 of 13
marcus24
Aspirant

Re: c7000v2 ac1900

i check my logs this morning and i saw Ping of death,dos attacvk tear drop derrivative, illegal fragments, can my ISP do somethin about it? or is it a netgear issues?

Message 13 of 13
Top Contributors
Discussion stats
  • 12 replies
  • 1351 views
  • 0 kudos
  • 3 in conversation
Announcements

Orbi WiFi 7