Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
SRX5308 - Slow Down
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2014-01-31
01:28 PM
2014-01-31
01:28 PM
SRX5308 - Slow Down
Our SRX5308 has been doing well for almost a year.
System Name: SRX5308
Firmware Version: 4.2.1-2
Secondary Firmware Version: 4.2.1-2
Now it has gone from
89Mb down / 91Mb Up [average]
to
<20Mb down / 91Mb up
I cannot get it to go over 20Mb down anymore.
We have attached a different Router to the same 100Mb line and that Router is fine
90+Mb down / 90+ Mb up
What could have caused our SRX5308 to act like this, we have truly changed nothing on the Router or within the network (at least as far as I can detect after 4 days tress & searching).
Though I will eventually default reset when I can get on location, I would still like to know why this device appears to be failing. Our other SRX5308's at other sites are fine.
System Name: SRX5308
Firmware Version: 4.2.1-2
Secondary Firmware Version: 4.2.1-2
Now it has gone from
89Mb down / 91Mb Up [average]
to
<20Mb down / 91Mb up
I cannot get it to go over 20Mb down anymore.
We have attached a different Router to the same 100Mb line and that Router is fine
90+Mb down / 90+ Mb up
What could have caused our SRX5308 to act like this, we have truly changed nothing on the Router or within the network (at least as far as I can detect after 4 days tress & searching).
Though I will eventually default reset when I can get on location, I would still like to know why this device appears to be failing. Our other SRX5308's at other sites are fine.
Message 1 of 2
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2014-11-26
09:07 AM
2014-11-26
09:07 AM
Re: SRX5308 - Slow Down
Try using the other WAN ports and test connection speeds.
Also, there is a newer FW that you can use. 4.3.1-22
Also, there is a newer FW that you can use. 4.3.1-22
Message 2 of 2