NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
M4100 12GF Firmware
Greetings, I have recently upgraded the firmware on my M4100 12GF (GSM7212F Layer 2+ ) switch. The switch will not save any configurations and everytime I reboot the switch it does not save the ...
Hi onyangodt,
Very strange...
Maybe the flash is broken on this M4100.
Please check private message for maintenance commands.
Thanks.
I've followed the above solution that you provided and still I get the same messages indicated in the above console screenshots. Is there another solution ?
Hi onyangodt,
Okay.
Let's try another solution.
Try to Delete the unused image.
1. Check current active image.
2. Delete the unused image.
3. Reload.
Please reference following screenshot about commands of CLI.
I will send you some maintenance commands through private message if this new solution won't work.
Greetings,
It still is not working.I also have downgraded back to the verions that the switch came with which was 10.0.2.13. Please reference the below screenshots
Hi onyangodt,
Very strange...
Maybe the flash is broken on this M4100.
Please check private message for maintenance commands.
Thanks.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
