This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
I have a stack m4300 24 by 24 not as failover but just as stack. I also have two Sophos XG 330s. I have one router going to one switch and another router going to the other switch. All are default vlan and it appears to be working. Anything wrong with that picture or any other configuratio that should be applied for traffic. I have the routers configured to route traffic but nothing on the M4300. M4300 is doing routing for internal network to get to internet but thats it.
Routers are setup as failover, One switch to one router another switch to the other router, then both routers connect to a dumb switch and from the dumb switch they connect to the gateway. I read that each gateway should be on a sepperate VLan is that correct, or is my setup ok.
