- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Re: XR500 sty in a loop after update DumaOS 3.0 2.3.2.108
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
hi there
i have problem whit my router
when i whas updateing my XR500 whit the firmware 2.3.2.108
wont go out of de update screen
i try to reboot dint work
turn the router off and on didnt work ether
how cane i restore this
Solved! Go to Solution.
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You can try factory resetting it. Push and hold reset for 7-15 seconds while its powered on.
If that doesn't work, it might have corrupted firmware. you can try recovering it using tftp or nmrpflash.
are you on windows? if so, follow this guide
https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP
just make sure you enable tftp
https://www.thewindowsclub.com/enable-tftp-windows-10
and here's a video walk through using a tftp client. Use the built in one for windows 10 though. the video is more of an example of how its done.
https://www.youtube.com/watch?v=R9DLrLQrpaw
and if that doesn't work, you can try using nmrpflash
https://github.com/jclehner/nmrpflash
All Replies
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You can try factory resetting it. Push and hold reset for 7-15 seconds while its powered on.
If that doesn't work, it might have corrupted firmware. you can try recovering it using tftp or nmrpflash.
are you on windows? if so, follow this guide
https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP
just make sure you enable tftp
https://www.thewindowsclub.com/enable-tftp-windows-10
and here's a video walk through using a tftp client. Use the built in one for windows 10 though. the video is more of an example of how its done.
https://www.youtube.com/watch?v=R9DLrLQrpaw
and if that doesn't work, you can try using nmrpflash
https://github.com/jclehner/nmrpflash
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: XR500 sty in a loop after update DumaOS 3.0 2.3.2.108
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: XR500 sty in a loop after update DumaOS 3.0 2.3.2.108
hi plemans
thanx fore the info
the tftp workt me
@plemans wrote:You can try factory resetting it. Push and hold reset for 7-15 seconds while its powered on.
If that doesn't work, it might have corrupted firmware. you can try recovering it using tftp or nmrpflash.
are you on windows? if so, follow this guide
https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP
just make sure you enable tftp
https://www.thewindowsclub.com/enable-tftp-windows-10
and here's a video walk through using a tftp client. Use the built in one for windows 10 though. the video is more of an example of how its done.
https://www.youtube.com/watch?v=R9DLrLQrpaw
and if that doesn't work, you can try using nmrpflash
https://github.com/jclehner/nmrpflash
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: XR500 sty in a loop after update DumaOS 3.0 2.3.2.108
@Netduma-Fraser wrote:
I can't see the picture but you may need to just clear the web browser cache/cookies and then refresh the page. If not the TFTP method above is a good plan.
hi
it whas not my browser that whas hanging
it whas the router didnt go to the dashboard
it sty in the upgrade mode
but it is fix now
thanx all
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: XR500 sty in a loop after update DumaOS 3.0 2.3.2.108
Glad it worked!
• What is the difference between WiFi 6 and WiFi 7?
• Yes! WiFi 7 is backwards compatible with other Wifi devices? Learn more