Re: NETGEAR AX8 / RAX80 WAN/Internet Throttled - AVOID BUYING

mayeen12 · ‎2020-04-12

My Router: Nighthawk RAX80 Firm V1.0.2.76_1.0.35

Internet: Cable 940 MBPS - I constantly get 940+ mbps when my PC is connected directly to CABLE MODEM

Devices; 15-20

I'm annoyed beyond believe - i purchased by router Dec 2019 - 500 CAD$

This router has mind of its own for the WAN PORT.

There is countless people reporting this, I found this problem from the day i purchased it.

If only i had known, i would have returned it than, back than i asssumed it was my internet being throttled by ISP

What happens is, the router is run for 1h at full speed wan, than starts throttling to 360 MBPS - wifi or wired. with QOS ON

Than if i turn off my QOS, speed goes up to 480 mbps.

THan if i trun back my QOS, speed goes up to 950+ mbps for few hours. until router starts throttling again.

Everything else - wifi speed, AX speed 800+ mbps over wifi, internet network. WORKS PERFECLTY --
GOD DAM WAN is ONLY porblem only if you have Gigabit connection.

THE DAMM TECH at netgear are bunch of jockers with their MTU settings and stuff..

I wish i had returned it

mayeen12 · ‎2020-04-17

I finally fixed my problem

Final Results, I'm getting FULL 940 to 985 MBPS download (From Internet & Internal NAS Drive) - both in wired and wifi mode.

PLEASE NOTE** All my clients are wired or AC or AX devices.

Step 1 - Get the latestest firmware

Step 2 - Turn OFF QOS

Step 3 - Turn OFF Traffic Meter

Step 4 - Turn OFF Access Control

Step 5 - Test you MTU with your MODEM from a wired connection MODEM <> PC > https://kb.netgear.com/19863/Ping-Test-to-determine-Optimal-MTU-Size-on-Router

Step 6 - Adjust your MTU settings >> https://kb.netgear.com/24015/How-do-I-change-the-MTU-size-on-my-Nighthawk-router

Step 7 - Use WiFI Analizer - FIND THE BEST CH for WiFI - I put AUTO for 2.4 and CH36 for 5ghz

Step 8 - ENABLE BEAMFORMING > DISABLE MUMIMO > ENABLE AX

@mayeen12 wrote:
My Router: Nighthawk RAX80 Firm V1.0.2.76_1.0.35
Internet: Cable 940 MBPS - I constantly get 940+ mbps when my PC is connected directly to CABLE MODEM
Devices; 15-20

I'm annoyed beyond believe - i purchased by router Dec 2019 - 500 CAD$
This router has mind of its own for the WAN PORT.

There is countless people reporting this, I found this problem from the day i purchased it.
If only i had known, i would have returned it than, back than i asssumed it was my internet being throttled by ISP

What happens is, the router is run for 1h at full speed wan, than starts throttling to 360 MBPS - wifi or wired. with QOS ON

Than if i turn off my QOS, speed goes up to 480 mbps.
THan if i trun back my QOS, speed goes up to 950+ mbps for few hours. until router starts throttling again.

Everything else - wifi speed, AX speed 800+ mbps over wifi, internet network. WORKS PERFECLTY --
GOD DAM WAN is ONLY porblem only if you have Gigabit connection.

THE DAMM TECH at netgear are bunch of jockers with their MTU settings and stuff..

I wish i had returned it

View solution in original post

michaelkenward · ‎2020-04-13

@mayeen12 wrote:

My Router: Nighthawk RAX80 Firm V1.0.2.76_1.0.35

Internet: Cable 940 MBPS - I constantly get 940+ mbps when my PC is connected directly to CABLE MODEM

Make and model of that modem?

mayeen12 · ‎2020-04-13

Technicolor TC4400

@michaelkenward wrote:
@mayeen12 wrote:
My Router: Nighthawk RAX80 Firm V1.0.2.76_1.0.35
Internet: Cable 940 MBPS - I constantly get 940+ mbps when my PC is connected directly to CABLE MODEM

Make and model of that modem?

michaelkenward · ‎2020-04-13

Funny looking beast. Looks like modem only. No routering. But two LAN ports? Alien country to me.

mayeen12 · ‎2020-04-13

@michaelkenward wrote:
Funny looking beast. Looks like modem only. No routering. But two LAN ports? Alien country to me.

Yes - it is MODEM only capable of up to 2 Gbit/s via OFDM 2x2 docsis 3.1

SOLID modem, never have any issues

Topology · ‎2020-04-14

Mayeen12, does your Technicolor TC4400 modem support WAN aggregation – and, if so, have you tested that feature with your RAX80?

mayeen12 · ‎2020-04-15

@Topology wrote:
Mayeen12, does your Technicolor TC4400 modem support WAN aggregation – and, if so, have you tested that feature with your RAX80?

My struggle is just getting one port to get working properly at 1 gig, i do not think my model will allow 2 gig at the moment, as the ISP needs to send the proper profile to the modem

mayeen12 · ‎2020-04-15

How to get this fixed! i'm getting fed up of not getting the right download beacause of this router

mayeen12 · ‎2020-04-17