Since around 2 weeks I have automatic new firmware installed to my Orbi RBR50 and 2 satellites. 2 weeks of nightmare where internet stop working in the middle of the day due to that. Then. The day after a new one is released and again automatically installed and my internet cut and remain unstable the whole day. 2 weeks of having new firmware every day!!! I connect to the Admin platform but still can't see the option to unable the automatic installation. Why does this option do not exist yet? Or if it is somewhere how to do it? Am fed up tonhave automatically installation during the working hour abmnd I fail to all my calls. I WANT to update those firmware WHEN I want. Not when Netgear wants it. Who can help??? Thanks sabrina
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too? Be sure your using a good quality LAN cable between the modem and router. CAT6 is recommended.
Not sure why I should upload manually the FW if this is my main issue? All the cuts are coming from the fact that there is an automatic push for last FW installation. This can be 3 times per day those days. Am just looking for a simple option where I can enable the automatic installation
Not currently on Orbi AC. There is on Orbi AX systems.
Only one push will be seen. If your having problems then a factory reset maybe needed along with manually loading FW files on the RBS and RBR using a wired PC.
@sabrinamane wrote: Not sure why I should upload manually the FW if this is my main issue?
It is just one of those things that removes variables and reduces the risk of corruption during the installation.
Mostly updates works fine, but experienced users like to control their own destiny. That also eliminates the risk of catastrophe with lost internet connections in mid update.
It may be worth trying if you have post-update problems, but a more useful measure might be the "factor reset".
That too can be more witchcraft than science, and usually not necessary. But if you have problems, it makes sense to try it.
Likewise a network reboot can also help.
Be sure to restart your network in this sequence:
Turn off and unplug modem.
Turn off router and computers.
Plug in and turn on modem. Wait 2 minutes for it to connect.
Turn on the router and wait 2 minutes for it to connect.
Turn on computers and rest of network.
Again, 99% of updates may not need it, but we are talking troubleshooting here.
If you still have problems after this rigmarole, then you have to dig deeper.
