This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
Hi, I've always run ethernet straight to this satellite, but at some point I realized my connection was unstable and saw that it was connected to the 2.4ghz guest network as opposed to the primary 5ghz. I've removed the satellite from attached devices, pinhole reset, but it keeps coming back as the same satellite name I previously set-- on top of that, after the re-sync, it still shows it connected to the guest network name in Windows. Please advise, thanks! Appreciate the help. Super frustrating. I don't know how else I can force this satellite to connect to the primary network since it's on ethernet only.
I understand that your RBS50 connects to the guest portion of your network when connected through ethernet. This issue can be caused by having two active DHCP servers running at the same time. This issue can be resolved by disabling your RBR50's DHCP server and then disconnecting and reconnecting the RBS50.
To turn off the DHCP server for your Orbi follow the instructions below:
Enter orbilogin.com
Enter the admin user name and password.
On the BASIC Home page: Select ADVANCED > Setup > LAN Setup.
I understand that your RBS50 connects to the guest portion of your network when connected through ethernet. This issue can be caused by having two active DHCP servers running at the same time. This issue can be resolved by disabling your RBR50's DHCP server and then disconnecting and reconnecting the RBS50.
To turn off the DHCP server for your Orbi follow the instructions below:
Enter orbilogin.com
Enter the admin user name and password.
On the BASIC Home page: Select ADVANCED > Setup > LAN Setup.
