ETA for 6.7.1

[schnax]

Reading all the problems people have with 6.7.0 - it was mentioned that 6.7.1 will fix those.

When will 6.7.1 be release?

I myself had to do a re-install of OS on two of my devices as they became unresponsive.

[mdgm-ntgr · Accepted solution]

ReadyNAS OS 6.7.1 is now available!

[msnasx]

---

@schnax wrote:

I myself had to do a re-install of OS on two of my devices as they became unresponsive.

---

Please could you share with rest of us with same problem which version of FW you have used to perform OS re-install? 6.7.0 or 6.6.1?

Have you maybe checked before OS -reinstall what was the error with readynasd service?
Were your data fully preserved after this procedure?

Thank you in advance,

[schnax]

I updated from 6.6.1 to 6.7 - I used the built re-install boot function to re-install 6.7.

I was unable to connect to the Device even not with Raidar - so no error code to see.

Lights (Power & Backup) were flashing on the device.

Data was fully preserved beside network and password settings.

Devices are working now besides having problems with Egnyte now but waiting on their support to fix - I'm assuming the reinstall did something Egnyte didn't like.

[msnasx]

---

@schnax wrote:

I updated from 6.6.1 to 6.7 - I used the built re-install boot function to re-install 6.7.

---

Thank you so much!! I have just done the same 10 minutes ago and at least my NAS is responsive at the moment.

I will follow-up how it will handle itselft until morning and provide report here.

[mdgm-ntgr]

There is no ETA for 6.7.1 yet.

Not sure if Egnyte has posted their package for 6.7 yet.

[msnasx]

---

@msnasx wrote:

---

@schnax wrote:

I updated from 6.6.1 to 6.7 - I used the built re-install boot function to re-install 6.7.

---

I will follow-up how it will handle itselft until morning and provide report here.

---

This morning NAS is still working as expected! 🙂

Only visual difference I can notice currently is that there is no information how many space is occupied by snapshots on System -> Overview page in frontview.

Is there a way to remove all snapshots from SSH?

[schnax]

So now that 6.7.0 if officaly pulled back/recalled what do current users with NAS problems do?

[mdgm-ntgr]

---

---

@msnasx wrote:

Only visual difference I can notice currently is that there is no information how many space is occupied by snapshots on System -> Overview page in frontview.

---

That feature relies on quotas being enabled on the volume.

---

@msnasx wrote:

Is there a way to remove all snapshots from SSH?

---

Yes, but you can do it using the GUI.

[mdgm-ntgr]

---

@schnax wrote:

So now that 6.7.0 if officaly pulled back/recalled what do current users with NAS problems do?

---

We'd work to assist users as we normally would.

There's not a long wrong with 6.7.0, but we made the decision to pull it for now considering the early feedback we've been getting.

I believe we're planning to bring forward 6.7.1 to address a few things and we'll probably push back some things that were planned for 6.7.1 to later releases.

A number of users have run into OOMing with volume quotas enabled, so we want to address a few issues regarding disabling quotas on the volume.

Then there's a GUI related AD issue that we're working on as well.

[F_L_]

Is it possible to do a fw update from SSH?

[mdgm-ntgr]

Yes.

Are you unable to access the web admin interface?

Are you also unable to access https://ip.address.of.nas/fwbroker ?

[F_L_]

Yes, frontend just hangs on the ReadyNas 6.7.0 page and after a while gives me the Connecting to ReadyNas page...

Dunno if the first beta adress this?

https://192.168.1.126/fwbroker seems to work, thanks!

[mdgm-ntgr]

To update using SSH one would do e.g. for x86 systems:

# cd /root
# wget URL
# echo /root/ReadyNASOS-6.7.1-T244-x86_64.img > /etc/.flash_update
# rn_shutdown -r

If you're still having problems accessing the web admin page on the beta can you download the logs using RAIDar 6.2 and send them in (see the Sending Logs link in my sig)?

[F_L_]

GUI is back with 6.7.1.

Will report if it gets unresponsive again.

[jak0lantash]

http://<ip_address>/fwbroker may also help to update the firmware.

[kekegsm]

I saved these SSH commands, it is very useful for the future. Thanks!

[Mr_Fr33z]

Kindly request to forum admins to regularly update KNOW ISSUES section in release information posts i.e. here

There are at least 4 major issues with fw 6.7.1 and on each upgrade i need to dig into forum to check if i can or cannot execute the fw upgrade already...

..it will be appreciated for each it-admin whos has Netgear NASs on production enviroment.

thx in advance.

[F_L_]

---

@F_L_ wrote:

GUI is back with 6.7.1.

Will report if it gets unresponsive again.

---

This morning I noticed my NAS was unresponsive, no gui, no ssh, no access to shares

I had to shut it down by pressing the button.

Now the GUI is back and it says it is resyncing.....

Downloaded logs if anyone wants to take a look

[mdgm-ntgr]

Sure you can send in your logs if you want.

[F_L_]

Ok, Mail sent

[mdgm-ntgr]

I can see this line

Apr 21 23:06:41 Ultra kernel: TCP: request_sock_TCP: Possible SYN flooding on port 8090. Dropping request.  Check SNMP counters.

and above it a whole lot of lines about a mono service

[kekegsm]

_F_L, if the NAS next time unresponsible, first press 3 times the POWER button on it, wait a bit. It will not shutdown.

After a minute or two, you can long press the POWER button to hard shutdown.

If you make this, it stop some services, and after the restart not need resync.

[F_L_]

---

@mdgm wrote:

I can see this line

Apr 21 23:06:41 Ultra kernel: TCP: request_sock_TCP: Possible SYN flooding on port 8090. Dropping request.  Check SNMP counters.

and above it a whole lot of lines about a mono service

---

Thanks, sabnzbd is running on 8090 and sonarr is using mono.

[F_L_]

---

@kekegsm wrote:

_F_L, if the NAS next time unresponsible, first press 3 times the POWER button on it, wait a bit. It will not shutdown.

After a minute or two, you can long press the POWER button to hard shutdown.

If you make this, it stop some services, and after the restart not need resync.

---

Good to know, thanks!

[ikonuk]

Could somebody kindly post the SSH (Linux) commands for Arm systems (RN102)?

Thanks.

I. Konuk