RC13 readynasd uses all CPU Time

[aequus]

Hi,

I have a Ultra 4 Plus with 4 GB RAM and 4x4TB HDs in use and with the never versions it become (again) more and more stable. One problem is left under certain conditions readynasd uses more and more CPU at a certain level I can no longer access the Webgui and have to reboot the system by telnet or power cut.

It seems that the problem occours when temporary the load level went above a certain load avarege (above 5). Although the transfer caused the high load is done it never came back to the normal level below one.

In a case the load avarage raises not above 3 it came back to normal operation mode also over weeks. Any idea?

Before reboot:
top - 10:24:50 up 13:25, 1 user, load average: 6.95, 7.30, 8.10
Tasks: 310 total, 2 running, 308 sleeping, 0 stopped, 0 zombie
%Cpu(s): 3.4 us, 24.5 sy, 0.0 ni, 72.0 id, 0.0 wa, 0.0 hi, 0.2 si, 0.0 st
KiB Mem: 4040688 total, 3797816 used, 242872 free, 216 buffers
KiB Swap: 1047420 total, 0 used, 1047420 free, 2996196 cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2312 root 19 -1 8421m 41m 2564 R 97.1 1.1 55:33.71 readynasd

After reboot:
top - 10:52:16 up 17 min, 1 user, load average: 0.92, 0.89, 0.69
Tasks: 178 total, 1 running, 177 sleeping, 0 stopped, 0 zombie
%Cpu(s): 4.0 us, 4.5 sy, 0.0 ni, 87.6 id, 3.6 wa, 0.0 hi, 0.3 si, 0.0 st
KiB Mem: 4040688 total, 2536452 used, 1504236 free, 2528 buffers
KiB Swap: 1047420 total, 0 used, 1047420 free, 2141908 cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2122 root 19 -1 489m 38m 6732 S 0.3 1.0 0:15.45 readynasd

[super_poussin]

can you upgrade to final version and see ?

[mdgm-ntgr]

Also if you download your logs what does your initrd.log look like?