Any add-on available for Tautulli (PlexPy V2)

[jhagg]

Hello,

I am wondering if developer such as Myhnlo can provide an add-on for the new PlexPy V2 called Tautulli?  This would be very helpful!

http://tautulli.com/

[viperhansa · Accepted solution]

Hi guys!

Just to inform you that IF you had PlexPy by Myhnlo installed (pre 2.xx.x) it will AUTOUPDATE to Tautulli VERSION V2.0.22..

No need to get an updated appinstaller.

I had earlier PlexPy installed. Installed the TauTulli BETA 2.xx.xx and run both versions on different ports.

Just the other day, PlexPy became Tautulli and was autoupdated.

Then i just shutdown the BETA version and only runs the "old" newly updated version.

It is still visible as PlexPy in apps. And you can still use the On/Off switch as normal.

Small info.. Lots of text.. 🙂

Regards

Hans 

[Marc_V]

Hi @jhagg

Checked https://github.com/tautulli/Tautulli-Wiki/wiki/Installation and indicates that you need to have Phyton 2.7 installed to support the app. You might want to check https://rnxtras.com for that. Then Tautulli will work on the Plexpy app developed by @Myhnlo.

Might as well send the developer a PM to confirm this.

hope this helps!

[Marc_V]

Hi @jhagg

We’d greatly appreciate hearing your feedback letting us know if the information we provided has helped resolve your issue or if you need further assistance.

If your issue is now resolved, we encourage you to mark the appropriate reply as the “Accept as Solution” or post what resolved it and mark it as solution so others can be confident in benefiting from the solution.
 
The Netgear community looks forward to hearing from you and being a helpful resource in the future!
 

Regards,

[viperhansa · Accepted solution]

Hi guys!

Just to inform you that IF you had PlexPy by Myhnlo installed (pre 2.xx.x) it will AUTOUPDATE to Tautulli VERSION V2.0.22..

No need to get an updated appinstaller.

I had earlier PlexPy installed. Installed the TauTulli BETA 2.xx.xx and run both versions on different ports.

Just the other day, PlexPy became Tautulli and was autoupdated.

Then i just shutdown the BETA version and only runs the "old" newly updated version.

It is still visible as PlexPy in apps. And you can still use the On/Off switch as normal.

Small info.. Lots of text.. 🙂

Regards

Hans 

[Mhynlo]

I was keeping my eye on its release and held back till some the issues with the early betas and upgrading to Tautulli. I have split the apps into the newer app naming (Tautulli) and added a migration of the older PlexPy data to the Tautulli app.

https://github.com/Mhynlo/rn-plexpy/releases/latest

You can also update the PlexPy app, but I am going to be phasing the PlexPy version of the app out.