GS348 capabilities - Is there a way to config switch to operate on only one subnet

[schumaku · Accepted solution]

Afraid, not much you can do then on network seggregation....

[schumaku]

Talking of the GS348, an 48 Port Gigabit Ethernet Unmanaged Switch, or for example the GS348, a S350 Series 48-Port Gigabit Ethernet Smart Switch and 4 SFP Ports here?

[winc]

Just a straight GS348 with 48 Gig ports.  No SFPs.

[schumaku · Accepted solution]

Afraid, not much you can do then on network seggregation....

[winc]

Thanks Schu.  That is what I thought.

[winc]

Sorry to bring this up again but I am trying to find something a little more formal on this topic and here is why:  An integrator performed a server rack relocation for me.  After the relo, my Admin network was present on a GS348, but the SCADA network that the switch was installed for has no presence.  The integrator is claiming it is because the switch is configured wrong.  Since I have done no configuration, I don't know where to look to build my case.

Search of the Netgear website does not seem to turn up any User Configuration Manual for the GS348.  Is there a way I can get anything more substantial from Netgear that indicates this switch is not configurable?

Thanks in advance for any help on this.

[schumaku]

Still (or again) talking of an unmanged GS348? What is the exact product model designation of the switch in question?

[winc]

Thanks Schu.  Yes, same switch as before.  I was able to get a response out of Netgear Tech Support and as expected, there are no configurations to be made on the GS348.