I have a ReadyNAS DUO v1 with two 2TB hard drivee and for the life of me I cannot get it configured as 2 volumes (2TB for each volumes). Here is what I have done...
1. Factory reset. 2. Select Setup in RAIDar and selected Flex-Raid 0. 3. Once it reboot I go to the web interface and I see my two hard drives. If I select both and create a volume and select RAID 0, it spans the 2 HDD to one volume with a total capacity of 4TB. If I select RAID 1, I get a total capacity of 2TB with redundancy. If I select only one HDD and create a RAID 0, once that is done, I cannot select the 2nd HD, see the reference screen shot.
Go to the "Add Volume" Tab. See it up the top to the right of "Volume C" ("Volume C" is highlighted with a purple background). Then you can add a RAID-0 volume using the second disk.
