drop connection iscsi

[TommyWong]

Hello

I use iSCSI on two RN314(firmware 8.6.0 and 8.6.1RC2) and Windwos 2012 with all update

Frequently i saw error in Windows:

Event 20 Connection to the target was lost. The initiator will attempt to retry the connection.

This situation is repeated on 2 PCs. 

Authentication in iSCSI is not used. Wire changed not help. =(

1 iscsi target = 1 server

[Marty_M]

Hello TommyWong,

It does appear that you have 2 RN314 that is encountering ISCSI connection error. May I verify the following information below.

1. Are you getting the same exact error on from both NAS?

2. Are you also encountering problem accessing shares?

3. Does iscsi lun automatically connect to the server?  

4. What provisioning is set on the lun is it thick or thin?

5. Do you still have a lot of space available on the data volume?

Please also try to disable the anti virus and any app installed and running on the NAS and check if that will make any difference.

 
Welcome to the community!
 
Regards,
Marty_M 
NETGEAR Community Team

[Marty_M]

Hello TommyWong,
 
We’d greatly appreciate hearing your feedback letting us know if the information we provided has helped resolve your issue or if you need further assistance. If your issue is now resolved, we encourage you to mark the appropriate reply as the “Accept as Solution” or post what resolved it and mark it as solution so others can be confident in benefiting from the solution. 

The Netgear community looks forward to hearing from you and being a helpful resource in the future!

Regards,
Marty_M
NETGEAR Community Team