Hi guys, So my system came up that I am running low on space, I have drives in the following order: 2TB, 3TB, 2TB, 2TB So I purchased a used 4TB WD Red drive, hotswapped it into bay 1 which did have the 2TB drive in and the drive shows although black/grey and no green light at the bottom on the web access picture of the NAS. If you pull the drive out while the system is on and then re insert it the light goes green but after refreshing the web page a few times the light shows black as if not connected. Would it sound like the drive is dead, even if within the volume tab you can see information on the HDD as in life cycle, hours etc? Thank you for any help in advance
