Nighthawk
81 Topics
Region change?
I bought R8000 from US during my travel and i want to use it within EU. Region setting can't be changed from admin interface and wireless performance is sluggish because of the low power compared to my home country. Is there any way to change region of this router other then US?Solved126KViews0likes22Comments
NetGet NightHawk X6 AC3200 R8000 - OpenVPN - MD5
Good night, I have a NetGear NightHawk X6 AC3200 R8000 with the firmware 1.0.4.12 installed, the lastest, and I can confirm that no change has been made to the VPN certificate, even though this was known at least since January 2018 when a NetGear Moderator indicated that NetGear was going to support the new certificate before OpenVPN stops supporting the MD5 certificate (April 2018). Here is the post I refer to: https://community.netgear.com/t5/Nighthawk-WiFi-Routers/R8300-Support-for-MD5-Certificates-with-Built-In-VPN/m-p/1496268#M81267 I insist to NetGear to solve this problem in the following days and fulfil with their word. This is a complete lack of respect to their clients and users, and I would not stand at all this situation. If necesary, I will take al necesary means to make sure that this problem is finaly resolved. Thanks in advance. Yours sincerely, Buzzetti MartínSolved4.3KViews1like2CommentsUPNP no longer works
I just updated to Firmware V1.0.3.16 After the router completed the update, UPNP no longer works. I have tried rebooting the router several times but the port is not being automatically forwarded to the computer on the network. I have never had an issue with this before. Two ports that are usually handled are transmission and Plex. I manually forwarded the ports and it is working. But I shouldnt have to manually manage the connections. Any ideas on how to get it working again?Solved5.1KViews0likes7CommentsHMAC Authentication Errors (via VPN)
Greetings--- I have a Nighthawk X4 (R7500), and have enabled the VPN Service per this article: https://kb.netgear.com/25389/Enabling-VPN-service-on-a-Nighthawk-router-using-a-MAC-OS-computer Everything connects fine, but I get the following errors: 2018-04-09 12:59:54 Authenticate/Decrypt packet error: packet HMAC authentication failed 2018-04-09 12:59:54 Authenticate/Decrypt packet error: packet HMAC authentication failed (repeated)... I am able to access resources on my local network, but the connection is VERY slow. Services like RDP are impossible to use. My config: client dev tap proto udp sndbuf 393216 rcvbuf 393216 ;dev-node NETGEAR-VPN remote xxxx.xxxxx.net12974 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ;remote-cert-tls server cipher AES-128-CBC comp-lzo verb 0Solved5.3KViews0likes2CommentsCan't disable 60GHz 802.11ad Broadcast Name from being transmitted
Model: Netgear R9000 / AD7200 Nighthawk X10 Router The 60Ghz LED is lit on the router, and under the "Advanced Wireless Settings (60GHz 802.11ad)", the "Enable Wireless Router Radio" is unchecked, but the "Broadcast Name" is still transmitting. All of the other bands are unchecked and aren’t transmitting, so why is this the only one? I've tried every possible configuration in the router setup, but nothing works. Any idea on how to turn it off?Solved4.4KViews0likes3CommentsNighthawk R6700v2 losing connection to CM700 Modem
Hi there, We are relatively new Comcast Xfinity custmers and decided to buy our own Modem (CM700) and Router (Nighthawk R6700v2). Every morning we find that our computers are disconnected from the internet (DNS Server error), although the Comcast Home Security system is connected through our Modem... and I can access the Internet on my phone when the computers show they are disconnected, however. Each morning, I have manually reset the modem. Today, however, I reset the router instead and the system came back up... which suggests the problem is with the router. I have been told Comcast send updates around midnight every day... and thought this might be causing the modem/routers issues... Can anyone advise on how I would investigate the issue with the router? Thanks in anticipation, AllanSolved9.8KViews0likes15CommentsNighthawk r7500 vpn setup
I'm new to VPN but learn quickly. I'm trying to setup VPN on my router for a layer of security for my home. I am getting error messeges with openVPN. Following the instructions on the router, many forums, and the OpenVPN resources, I am not able to get this working. I receive this error "warning: no server certificate verification method has been enabled. see http://openvpn.net/howto.html#mitm for more info." can someone please assist? Perhaps have a walk through other than what's just on the router? Thank you in advance.Solved26KViews0likes10CommentsChanged router password not can't login
Having trouble with my router. Did login using the default login. Once in there was a firmware update that I processed. Had to then log back in no problem. Next I changed the router password and did enable recovery questions option. Then it logged me out, but now I can't log back in with the old or new password. Used the router recovery and is shows the right new password. Still no luck!!! Tried 3 browsers, cleared internet cache and used both wireless and wired connections. Also an ipad too! Now what do I do? Thanks for any expert help, DianaSolved4.4KViews0likes2CommentsReadycloud files aren't available through the browser - R7000
I setup Readycloud on my R7000 using a 250gb Samsung SSD but I can't access my files through the web interface (the only option available for my Macbook). The Android app on my phone works great remotely (but only the app - no files are visible when using the browser). I've tried using the latest versions of both Chrome and Safari multiple times over the past month to no avail. Any help would be GREATLY appreciated. Thanks! -- Device: Nighthawk R7000 Firmware: Firmware V1.0.7.2_1.1.93 OSX 10.11.6/Macbook Pro Android 6.0.1/Nexus 6 Android App (works fine) Android Browser (no files- same as desktopSolved2.9KViews0likes4CommentsUnable to share an available network folder
Router: Nighthawk R7000 Hardware Version : R7000 Firmware Version: V1.0.7.12_1.2.5 GUI Language Version: V1.0.7.12_2.1.38.2 I plug in my USB drive, the router recognizes the drive but I am unable to SHARE the drive or Create Network Folder. I have tried several USB drives, and get same resultsSolved3.7KViews0likes2Comments
