NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Orbi setup (no internet)
Ok, this is frustrating as hell. I have tried nearly everything I have seen on here and yet the Orbi still says no Internet. If I plug my old router in it goes through first time. Before anyone asks, I have entered correct PPPoE information as required. I have also: * Ensured the modem was off for the initial installation * Tried spoofing the original router's Mac Address * Reset everything to defaults many times * Used different cables * Moved ports on modem from LAN 1 to LAN 4 as suggested * Upgraded to the latest firmware and run through all steps again. This is my second day of trying to get the Orbi working. I'm frustrated beyond belief, and am ready to return it to the store. Any suggestions?N600 Router Model C3700 - Power on, All Lights Flash Periodically, No Internet, No WiFi
C3700|N600 Cable modem wifi router. 1.y years old. It suddenly stopped working. When switched on power light is getting on (green) and nothing happens then after a while (may be 30 secs) all the lights flash and goes off then power stays on. The router stays on like this (periodic flashing of all the lights). In this state the router is not accessible with either by network cable nor by WiFi and there is no internet connectivity as well. This problem was occuring once in a while and then it got resolved automatically i.e. if you switch it off and leave it like that for hours and switch it on then some time it worked earlies. But now it stopped working completely and it exhibits the above mentioend behavior consistently and not going back to the working state. Whether it indicates the firmware got corrupted and it need to be reinstalled. If yes how to do that? Factory reset and power cycle did not help. The behavior remains the same (i.e. power on, periodic flashing of all the lights but no internet, no WiFi and no connectivity to the modem/router).
ping and tracert OK but no internet
I have a N450 CG3000Dv2 the cannot reach the internet, but ping and tracert requests are ok. The only incident was a power cycle or cut wednesday. there were not issues before that. The modem router was probably on for a month or more before that, and remained in place. I can accept Facetime requests, but the connection is not established. Web browsers can page a page, and throw up a message to check proxy or firewall. I never set up either one to be in use. Ping and tracert to my primary DNS and websites work fine. Tracert seems slow, but I have no benchmark. I factory reset the moden router and returned to my config (name/pwd) easliy. Everything inside the house (camere and computers) all have the expected access. nothing can get out to surf the net. Any suggested troubleshooting steps? Thanks,EX6100 wifi extender set up troubles
Hi I've been trying to install the range extender without much success. the genie didn't start up, so connected directly and went in through 192.168.1.1. Had trouble with passwords, but thought I worked it out, There was no check box allowing me to use the same security settings.Can I have a different password on the extender from the router? Still couldn't access any wireless devices properly. had all green lights, but no internet and each item required a login and password - would it be admin/password? What happens if I don't connect them all before clicking continue (page 11 of set up guide) Can they be connected later? This morning tried again, still no internet access, and couldn't get an windows device to connect to the network at all through the extender. Went through the factory reset then updated firmware bypassing genie. Now it wants me to sign in but won't accept admin/password. What do I do now? (I'm tempted to throw it away, but a waste of money). All I wanted was something to plug in which would make the existing wireless network stronger at the other end of the house.Had the AC750 for a week and have already needed to restart router to maintain connection?
I bought this extender less than a week ago and at first it worked great. Then today suddenly my phone and computer could not access the internet. They both had full bars from the extender, and could connect to the extender, but could not access the internet. They could both access the internet directly from the router when I moved close enough, however, so I know the problem is with the extender. I unplugged the extender, then unplugged and replugged in the router and waited for it to boot up, then replugged in the extender, and everything worked fine. Unfortunatley the router is in my landlords house so I had to ask to enter his house and do this. I don't want to have to do this every five days. Please tell me: is there something else I can do to prevent this from happening again?Help! WN3000RP range extender no longer connects since Windows 10
Hi All, I have found other posts on this community and the Microsoft community with users struggling to understand why their extenders no longer work. I took advantage of the free Win 10 upgrade but now am very frustrated that I can no longer connect to the my range extender. I have already: ensured the latest firmware is installed, shut off anti-virus protection and completed reboots of both my Netgear wireless router and extender. I'm out of options. Others must fill this pain. It makes no sense to me that this device (Lenovo Laptop) can connect to the wireless router but not the extender with the exact same info. I've completed all the obvious trouble shooting and different combinations of logging on. I am eager to hear another idea of how to solve this without giving up and buying a new extender. Sincerely, Jonathan